NPort 5650I-8-DTL-T - 8-port desktop lite device server, 10/100M Ethernet, RS-232/422/485 DB9 Isolation, 12-48VDC, -40-75 Degree
by MOXA

The NPort 5650I-8-DTL-T device servers can conveniently and transparently connect 8 serial devices to an Ethernet network, allowing you to network your existing serial devices with basic configurations. You can both centralize management of your serial devices and distribute management hosts over the network. The NPort® 5600-8-DTL device servers have a smaller form factor than our 19-inch models, making them a great choice for applications that need additional serial ports when mounting rails are not available.

• Ethernet Interface
Number of Ports	1
Speed	10/100 Mbps, auto MDI/MDIX
Connector	8-pin RJ45
Magnetic Isolation Protection	1.5 kV built-in
• Serial Interface
Number of Ports	8
Serial Standards	NPort 5610-8-DTL: RS-232 NPort 5650-8-DTL/5650I-8-DTL: RS-232/422/485
Connector	DB9 male
Serial Line Protection	15 kV ESD protection for all signals 2 kV isolation protection (NPort 5650I-8-DTL only)
RS-485 Data Direction Control	ADDC® (Automatic Data Direction Control)
Pull High/Low Resistor for RS-485	1 kΩ, 150 kΩ
Terminator for RS-485	120 Ω
• Serial Communication Parameters
Data Bits	5, 6, 7, 8
Stop Bits	1, 1.5, 2
Parity	None, Even, Odd, Space, Mark
Flow Control	DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate	50 bps to 921.6 kbps
• Serial Signals
RS-232	TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422	Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w	Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w	Data+, Data-, GND
• Software
Network Protocols	ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, Rtelnet, ARP, RFC2217
Configuration Options	Web Console, Telnet Console, Serial Console, Windows Utility
Windows Real COM Drivers	Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers	SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY Drivers	Linux 2.4.x, 2.6.x, 3.x
• Physical Characteristics
Housing	Metal
Weight	NPort 5610-8-DTL: 1,760 g (3.88 lb) NPort 5650-8-DTL: 1,770 g (3.90 lb) NPort 5650I-8-DTL: 1,850 g (4.08 lb)
• Environmental Limits
Operating Temperature	Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 75°C (-40 to 167°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
• Power Requirements
Input Voltage	12 to 48 VDC
Input Current	NPort 5610-8-DTL: 340 mA @ 12 VDC NPort 5650-8-DTL: 470 mA @ 12 VDC NPort 5650I-8-DTL: 740 mA @ 12 VDC
• Standards and Certifications
Safety	UL 60950-1
EMC	EN 55032/24
EMI	CISPR 32, FCC Part 15B Class A
EMS	IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz, 3 V/m; Signal: 3 V/m IEC 61000-4-8 PFMF IEC 61000-4-11 DIPs
• Reliability
Alert Tools	Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger	Built-in WDT (watchdog timer)
• MTBF (mean time between failures)
Time	NPort 5610-8-DTL: 953,388 hrsNPort 5650-8-DTL: 740,457 hrs NPort 5650I-8-DTL: 258,150 hrs
Standard	Telcordia (Bellcore) Standard TR/SR

NPort 5650I-8-DTL-T.pdf

1,622 K