|
|
|
Moxa NPort Z2150 - 1-port serial to ZigBee converter, 0 to 60 Degree C operating temperature
by MOXA
|
|
|
|
- IEEE 802.15.4/ZigBee compliant
- Network topologies: Mesh/Star/Cluster tree
- 128-bit AES hardware encryption
- Enhanced surge protection for serial and power
- Dual DC power inputs (NPort Z3150 only)
- Easy-to-use configuration utility
- Up to 99 nodes per network
|
|
|
Overview
The NPort Z2150 are IEEE 802.15.4/ZigBee compliant, providing a reliable wireless solution for serial-to-ZigBee networks requiring minimal wiring presence. The NPort Z2150 can be configured as a ZigBee coordinator (ZC), a ZigBee router (ZR), or a ZigBee end device (ZED). Any serial device can be connected to the NPort Z2150 and exchange data via PAN. An user-friendly utility is provided to configure the device type and network settings in simple steps.
Surge-protected Serial and Power Lines
Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa’s leading-edge surge immunity solution, which is applied to the NPort Z21500’s serial and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This surge protection provides a robust solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions.
| • ZigBee Interface |
| RF Standard |
802.15.4/ZigBee compliant |
| Frequency Band |
2.4 GHz |
| RF Data Rate |
250 kbps |
| Rx sensitivity |
-96 dBm |
| Tx Power |
4.5 dBm (Max) |
| Transmission Distance |
Up tp 100m (open space) |
| Antenna |
2dBi |
| RF Channel |
16 channels |
| Device Type |
Coordinator, Router , End Device |
| Network Topology |
Star, Mesh, Cluster tree |
| Security |
128-bit AES encryption algorithms |
| • Serial Interface |
| Number of Ports |
1 |
| Serial Standards |
RS-232/422/485 |
| Connector |
DB9 male |
| Serial Line Protection |
1kV surge protection, 15kV ESD protection for all signals |
| RS- 485 Data Direction Control |
ADDC (Automatic Data Direction Control) |
| • Serial Communication Parameters |
| Data Bits |
8 |
| Stop Bits |
1, 2 |
| Parity |
None, Even, Odd |
| Flow Control |
RTS/CTS |
| Baudrate |
50 bps to 230.4 kbps |
| • Serial Signals |
| RS-232 |
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| RS-422 |
TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-4w |
TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-2w |
Data+, Data-, GND |
| • Software |
| Windows Real COM Drivers |
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded |
| Configuration |
ZigBee Configuration Utility |
| Firmware Upgrade |
ZigBee Configuration Utility |
| • Hardware |
| DIP Switch |
Console/Operation Mode |
| SW1 |
Pull high/low resister, Termination for RS-422/485. |
| Reset Button |
Reset to default |
| • Physical Characteristics |
| Housing |
Aluminum |
| Weight |
340g |
| Dimensions |
Without ears: 52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in)
With ears: 75.2 x 80 x 22 mm (2.96 x 3.15 x 0.87 in) |
| • Environmental Limits |
| Operating Temperature |
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature |
-40 to 75°C (-40 to 167°F) |
| Operating Humidity |
5 to 95% RH |
| Altitude |
Up to 2000 m |
| Note |
Please contact Moxa if you require products guaranteed to function properly at higher altitudes. |
| • Power Requirements |
| Input Voltage |
12 to 48 VDC |
| Power Consumption |
45mA@12V
Connector: Power Jack with Screw, |
| • Standards and Certifications |
| Safety |
UL (UL60950-1), LVD (EN60950-1) |
| EMC |
CE (EN55022 Class A, EN55024), FCC Part 15 Subpart B Class A |
| • Reliability |
| Automatic Reboot Trigger |
Built-in WDT (watchdog timer) |
| MTBF (meantime between failures) |
Over 20 years |
|
|
|
|
|
|
