|
|
|
Moxa NPort Z3150 - 1-port ZigBee to Ethernet gateway, 0 to 60 Degree C operating temperature
by MOXA
|
|
|
|
- IEEE 802.15.4/ZigBee compliant
- Network topologies: Mesh/Star/Cluster tree
- 128-bit AES hardware encryption
- Enhanced surge protection for serial and power
- Dual DC power inputs
- Easy-to-use configuration utility
- Up to 99 nodes per network
|
|
|
Overview
The NPort Z3150 is IEEE 802.15.4/ZigBee compliant, providing a reliable wireless solution for serial-to-ZigBee networks requiring minimal wiring presence.
The NPort Z3150 was designed specifically to perform as a ZigBee Coordinator (ZC), providing nodes with an Ethernet interface to the ZigBee PAN. Internet connection ad network services are also provided via the ZigBee PAN. Remote users can monitor any ZigBee device in the PAN through the NPort Z3150.
The following figure shows a typical topology of a ZigBee network. The NPort Z3150 is the ZigBee coordinator (ZC) connected to numerous ZigBee routers (ZR) and the routers are connected to end devices(ZED).
.JPG)
| • ZigBee Interface |
| RF Standard |
802.15.4/ZigBee compliant |
| Frequency Band |
2.4 GHz |
| RF Data Rate |
250 kbps |
| Rx sensitivity |
-96 dBm |
| Tx Power |
4.5 dBm (Max) |
| Transmission Distance |
Up tp 100m (open space) |
| Antenna |
2dBi |
| RF Channel |
16 channels |
| Device Type |
Coordinator |
| Network Topology |
Star, Mesh, Cluster tree |
| Security |
128-bit AES encryption algorithms |
| • Ethernet Interface |
| Number of Ports |
1 |
| Speed |
10/100 Mbps, auto MDI/MDIX |
| Connector |
RJ45 |
| Magnetic Isolation Protection |
1.5 kV built-in |
| • Serial Interface |
| Number of Ports |
1 |
| Serial Standards |
RS-232/422/485 |
| Connector |
DB9 male |
| Serial Line Protection |
1kV surge protection, 15kV ESD protection for all signals |
| RS- 485 Data Direction Control |
ADDC (Automatic Data Direction Control) |
| • Serial Communication Parameters |
| Data Bits |
5, 6, 7, 8 |
| Stop Bits |
1, 2 |
| Parity |
None, Even, Odd, Mark, Space |
| Flow Control |
RTS/CTS, XON/XOFF |
| Baudrate |
50 bps to 921.6 kbps |
| • Serial Signals |
| RS-232 |
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| RS-422 |
TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-4w |
TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-2w |
Data+, Data-, GND |
| • Software |
| Windows Real COM Drivers |
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded |
| Configuration |
Web Console |
| Firmware Upgrade |
Windows Utility, Web Console |
| • Hardware |
| DIP Switch |
Console/Operation Mode |
| SW1 |
Pull high/low resister, Termination for RS-422/485. |
| Reset Button |
Reset to default |
| • Physical Characteristics |
| Housing |
Aluminum |
| Weight |
780g |
| Dimensions |
Without ears: 77 x 111 x 26 mm (3.33 x 4.37 x 1.02 in)
With ears: 100 x 111 x 26 mm (3.94 x 4.37 x 1.02 in) |
| • Environmental Limits |
| Operating Temperature |
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature |
-40 to 75°C (-40 to 167°F) |
| Operating Humidity |
5 to 95% RH |
| Altitude |
Up to 2000 m |
| Note |
Please contact Moxa if you require products guaranteed to function properly at higher altitudes. |
| • Power Requirements |
| Input Voltage |
12 to 48 VDC |
| Power Consumption |
120mA@12V
Connector: Power Jack with Screw, Terminal block |
| • Standards and Certifications |
| Safety |
UL (UL60950-1), LVD (EN60950-1) |
| EMC |
CE (EN55022 Class A, EN55024), FCC Part 15 Subpart B Class A |
| • Reliability |
| Automatic Reboot Trigger |
Built-in WDT (watchdog timer) |
| MTBF (meantime between failures) |
Over 20 years |
|
|
|
|
|
|
