NPort Z3150-T - 1-port ZigBee to Ethernet gateway

Moxa NPort Z3150-T - 1-port ZigBee to Ethernet gateway, -40 to 75 Degree C operating temperature
by MOXA

IEEE 802.15.4/ZigBee compliant
Network topologies: Mesh/Star/Cluster tree
128-bit AES hardware encryption
Enhanced surge protection for serial and power
Dual DC power inputs
Easy-to-use configuration utility
Up to 99 nodes per network

Description
Specification
Datasheet

Overview

The NPort Z3150-T is IEEE 802.15.4/ZigBee compliant, providing a reliable wireless solution for serial-to-ZigBee networks requiring minimal wiring presence.

The NPort Z3150-T was designed specifically to perform as a ZigBee Coordinator (ZC), providing nodes with an Ethernet interface to the ZigBee PAN. Internet connection ad network services are also provided via the ZigBee PAN. Remote users can monitor any ZigBee device in the PAN through the NPort Z3150-T.

The following figure shows a typical topology of a ZigBee network. The NPort Z3150-T is the ZigBee coordinator (ZC) connected to numerous ZigBee routers (ZR) and the routers are connected to end devices(ZED).

ZigBee Network

• ZigBee Interface
RF Standard	802.15.4/ZigBee compliant
Frequency Band	2.4 GHz
RF Data Rate	250 kbps
Rx sensitivity	-96 dBm
Tx Power	4.5 dBm (Max)
Transmission Distance	Up tp 100m (open space)
Antenna	2dBi
RF Channel	16 channels
Device Type	Coordinator
Network Topology	Star, Mesh, Cluster tree
Security	128-bit AES encryption algorithms
• Ethernet Interface
Number of Ports	1
Speed	10/100 Mbps, auto MDI/MDIX
Connector	RJ45
Magnetic Isolation Protection	1.5 kV built-in
• Serial Interface
Number of Ports	1
Serial Standards	RS-232/422/485
Connector	DB9 male
Serial Line Protection	1kV surge protection, 15kV ESD protection for all signals
RS- 485 Data Direction Control	ADDC (Automatic Data Direction Control)
• Serial Communication Parameters
Data Bits	5, 6, 7, 8
Stop Bits	1, 2
Parity	None, Even, Odd, Mark, Space
Flow Control	RTS/CTS, XON/XOFF
Baudrate	50 bps to 921.6 kbps
• Serial Signals
RS-232	TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422	TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w	TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w	Data+, Data-, GND
• Software
Windows Real COM Drivers	Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Configuration	Web Console
Firmware Upgrade	Windows Utility, Web Console
• Hardware
DIP Switch	Console/Operation Mode
SW1	Pull high/low resister, Termination for RS-422/485.
Reset Button	Reset to default
• Physical Characteristics
Housing	Aluminum
Weight	780g
Dimensions	Without ears: 77 x 111 x 26 mm (3.33 x 4.37 x 1.02 in) With ears: 100 x 111 x 26 mm (3.94 x 4.37 x 1.02 in)
• Environmental Limits
Operating Temperature	Standard Models: 0 to 55°C (32 to 131°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 75°C (-40 to 167°F)
Operating Humidity	5 to 95% RH
Altitude	Up to 2000 m
Note	Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
• Power Requirements
Input Voltage	12 to 48 VDC
Power Consumption	120mA@12V Connector: Power Jack with Screw, Terminal block
• Standards and Certifications
Safety	UL (UL60950-1), LVD (EN60950-1)
EMC	CE (EN55022 Class A, EN55024), FCC Part 15 Subpart B Class A
• Reliability
Automatic Reboot Trigger	Built-in WDT (watchdog timer)
MTBF (meantime between failures)	Over 20 years