|
|
|
I-7565-DNM - USB to DeviceNet Master Converter. Fully compliant with USB 1.1/2.0(Full Speed). Free Software development tools fo
by ICP DAS
|
|
|
|
I-7565-DNM_SUMMARY.html
-
Fully compliant with USB 1.1/2.0(Full Speed)
-
No external power supply is required as I-7565 takes it's power from the USB bus
-
DeviceNet Version: Volume I & II, Release 2.0
-
Programmable Master MAC ID and Baud Rate.
-
Baud Rate: 125k, 250k, 500k
-
Support Group 2 and UCMM connection
-
I/O Operating Modes: Poll, Bit-Strobe, Change of State / Cyclic
-
I/O Length: 512 Bytes max (Input/Output) per slave
-
Slave Node : 63 nodes max
-
Support Auto-Search slave device function.
-
Support on-line adding and removing devices
-
Support Auto-detect Group 2 and UCMM device
-
Auto-Reconnect when the connection is broken
-
Status LED: RUN, MS, NS
-
Free Software development tools for Windows
-
Windows 98/ME/2000/XP/8/10 an Linux drivers supported
|
|
|
I-7565-DNM_DESCRIPTION.html
I-7565-DNM is an economic solution of DeviceNet applications and acts a DeviceNet master device on the DeviceNet network. It is a "Predefined Master-Slave connection Set". I-7565-DNM supports Group 2 only Server and UCMM functions to communication with slave devices. It has an independent CAN bus communication port and has the ability to cover a wide range of DeviceNet applications.
I-7565-DNM.html
| Hardware
|
| CPU
|
80186, 80 MHz or compatible
|
| SRAM/Flash/EEPROM
|
512 KB / 512 KB / 16 KB
|
| ESD Protection
|
2 kV class A and 3 kV class B
|
| CAN Interface
|
| Controller
|
NXP SJA1000T with 16 MHz clock
|
| Transceiver
|
NXP 82C250
|
| Channel number
|
1
|
| Connector
|
9-pin male D-Sub (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+, N/A for
others)
|
| Baud Rate (bps)
|
125 k, 250 k, 500 k
|
| Transmission Distance (m)
|
Depend on baud rate (for example, max. 1000 m at 50 kbps )
|
| Isolation
|
3000 VDCfor DC-to-DC, 2500 Vrms for photo-couple
|
| Terminator Resistor
|
Jumper for 120 O terminator resistor
|
| Specification
|
ISO-11898-2, CAN 2.0A and CAN 2.0B
|
| Protocol
|
DeviceNet Volumn I ver2.0, Volumn II ver2.0
|
| USB Interface
|
| Connector
|
USB Type B
|
| Transmission speed
|
921.6 kbps
|
| Specification
|
USB 1.1 and USB 2.0
|
| LED
|
| Round LED
|
PWR LED, RUN LED, NS LED, MS LED
|
| Software
|
| Driver
|
Windows 98 / ME / NT / 2000 / XP / 7
|
| Library
|
VB 6.0, VC++ 6.0, BCB 6.0
|
| Power
|
| Power supply
|
By USB interface
|
| Power Consumption
|
3 W
|
| Mechanism
|
| Installation
|
DIN-Rail
|
| Dimensions
|
72mm x 101mm x 33mm (W x L x H)
|
| Environment
|
| Operating Temp.
|
-25 ~ 75 ?
|
| Storage Temp.
|
-40 ~ 80 ?
|
| Humidity
|
5 ~ 95% RH, non-condensing
|
|
|
