|
|
|
TP-DCDC-2424GR-VHP - Gigabit Very High Power DCDC Converter 18-36VDC In, 24V 70W PoE Inserter, 4 pair power, for UBNT airFiber X
by Tycon Systems
|
|
|
|
- Input Voltage 24VDC (18-36VDC)
- 8 wire 24VDC Passive POE Output
- High Power Output to 70W
- Dual DC Inputs for Connecting 2 Power Sources
- Gigabit Data Thruput
- Low self consumption power (<2W)
- Short Circuit, Over Current and Reverse/Over Voltage Protection
- Industrial Temperature Range
|
|
|
The Gigabit compatible TP-DCDC-2424GR-VHP are special very high power DC to DC converters / PoE inserters designed especially for Ubiquiti airFiber x™ wireless radio systems and other systems which require high power passive PoE (High PoE). The unique POE inserter supplies 24VDC PoE power on all 8 Ethernet wires (4 pair) with the following pinout: 1,2,4,5 V+ and 3,6,7,8 V- They have two isolated inputs for connecting 2 power sources, like a primary and backup power source. They have various protections for surge, short circuit and overload. The input and output are isolated.
|
TP-DCDC-2424GR-VHP |
Input Voltage |
+/- 18VDC to 36VDC |
DC Input Connector |
Removeable Screw Type Compression Wire Terminal (12 AWG Max) |
POE Specification |
Passive PoE ( 8 Wire , 4 Pair ) |
PoE Pinout |
1,2,4,5 V+ and 3,6,7,8 V- |
Output Voltage (+/-2.5%) |
24VDC |
Data in & Data/POE Output Connector |
RJ45 (Shielded), Shield is connected to FG (Frame Ground) Input |
Output Current (max) |
Up to 2.9A |
Output Power (max) |
70W Total
Note: Output power up to 70W at 40C. Derate by 1W for every 1 Deg C above 40C ambient.
Example: 60W at 50C |
Self-Consumption Power |
2W |
Efficiency (min) |
85% |
Line Regulation, Ripple, Noise |
1% |
Load Regulation |
5% |
EMC Standards |
FCC Class B EN55022 Class B |
Safety Standards |
UL1950, CSA 22.2 &TUV EN60950 |
Operating Temperature |
-40 to +70°C (-40 to +158°F) |
Operating Humidity (RH) |
5% - 90% |
Storage Temperature |
-40 to +80°C (-40 to +176°F) |
Dimensions (LxWxH) |
125 x 75 x 38mm (4.9 x 3 x 1.5”) |
|
|
