100BaseTX, Optional SIP-TLS, SRTP, incl. external UI
by PATTON

Up to 4 Analog Interfaces (FXS/FXO)

1, 2, or 4 analog ports. Either FXS-only or 1 FXS with 1 FXO for survivability purposes.

Advanced Calling Features

Call-waiting, hold, park, transfer, toggle, local and server-side conference, MWI, caller ID and more.

Full VoIP protocol support

SIPv2, SIPv2 over TLS**, SIPv2 over IPv6, T.38, G.722 HD voice, RTP Security with SRTP**, fax and modem bypass***, DTMF relay.

Lowest OPEX

Secure zero-touch and mass provisioning (HTTPS) coupled with operation, administration and management out of the Patton Cloud resulting in the lowest OPEX ATA on the market.

Survivability & Local Breakout

Resiliency or local breakout for the enterprise thanks to onboard FXO port.

Easy Management & Provisioning

Patton Cloud orchestrated, Web Wizard, HTTPS, TR-069*** zero-touch provisioning, SNMP, and command line interface. Automated mass provisioning for efficient large-scale deployments.

Small Form Factor & PoE Powered

Smallest size ATA on the market
PoE powered option (coming soon) —there is no need for a power plug at the remote location.

Outstanding Interoperability

Interoperable for voice and T.38 fax with leading SIP service providers, softswitch vendors, and major IP-PBX manufacturers.

Why SmartNode?

Patton Quality
Swiss Engineered—Made in the USA
Unrivaled Customer Support

FREE Software Upgrades

Description
Specification
Datasheet

The Patton Model SN200-2JS2V-EUI, legacy telephony equipment to nowadays common SIP trunk and hosted services. The SN200 Series support a variety of telephony interfaces, from 1 to 4 simultaneous calls. Depending on the model, there are FXS and FXO ports available for survivability or number portability during the All-IP migration phase.

Designed for professional network deployments, the SN200 provides Telco Operators and Enterprise users a cost-effective solution integrating legacy phones, fax and metering machines in to an All-IP Network.

Orchestrated by the Patton Cloud, the Capex associated with deployment, operation and management of the SN200 is the lowest in the market. Secure Zero touch, mass provisioning is standard and included in every SN200 model.

Call Capacity	Up to 4 simultaneous G.722 or G.711 or T.38 fax calls
Voice Signaling	SIPv2 & SIPv2 over TCP SIPv2 TLS** SIPv2 over IPv6 SIP call transfer, redirect Overlap or en-bloc dialing DTMF in-band, out-of-band Configurable tones Call Routing & Services Regular expression number matching Regular expression number manipulation Least Cost Routing Number blocking Short-Dialing Digit collection Distribution-Groups and Hunt-Groups
FXS Connectivity	FXS ports, RJ-11/12 2-wire Loopstar Programmable AC impedance, feeding, ring and onhook voltage Caller-ID FSK and ITU V.23/Bell 202 generation 5 REN load on FXS port
FXO Connectivity	2-wire Loopstart – RJ11/12 Programmable impedance Ring detection, tone detection Caller ID detection (FXS, DTMF) Disconnect supervision
Voice Processing	G.722, G.711m/A-law 729ab (8 kbps) G.726 (16, 24, 32 Kbps) G.168-2004 echo cancellation (64 ms) Up to 4 simultaneous low bandwidth, high definition voice or T.38 fax calls Silence suppression and comfort noise Adaptive and configurable dejitter buffer Configurable RTP packet length
Quality of Service	IEEE 802.1p, IEEE 802.1Q, 4096 VLANs (tag insertion/deletion), TOS, DiffServ labeling
Connectivity	One 10/100 Base-T Ethernet port (depending on Model - optional PoE powered IEEE 802.3af Class 2) Auto-MDIX DHCP Client (IPv4 & IPv6) PPPoE Client (multi-session) IP Multi-Netting, VLAN, Secondary IP IPv4 & IPv6 Dual Stack ICMP Dynamic and static NAT and NAPT Access Control List (ACL) DNS, DynDNS DHCP Server SNTP Client
Management	Patton Cloud managed Web/HTTPS, CLI with Telnet and SSH access Web Wizard Fully Documented CLI Telnet and HTTPs access TR-069***, TFTP, HTTP, HTTPS configuration/firmware up- and download SNMPv3 agent Separate config domain (LAN side config and WAN side config) MIB II and private MIB Built-in diagnostic tools Secure Auto-Provisioning with built in root CA
Dimensions & Weight	1 port: Weight: 2.4 oz (68 g) Dimensions: 3.8 L x 1.65 W x 0.75 H in. \| (9.7 L x 4.2 W x 1.9 H cm.) 2&4 port Weight: 3.2 oz (90 g) Dimensions:1.5 H x 4.13 W x 3.75 D in. \| (3.81 H x 10.5 W x 9.53 D cm)
Power	1 port: 110–230 VAC (50/60 Hz) - 3 Watts 2&4 port: 110–230VAC (50/60 Hz) - 7 Watts or PoE: IEEE 802.3af Class 2
Environment	Operating temperature: 32 to 104°F (0 to 40°C) Operating humidity: up to 90%, non-condensing) Industrial SmartNode - see SN4141E