| 
  
    |  |  
    | 
					
						|  | 
				
					| Patton SN5531/8BIS16VHP4G/EUI - SmartNode E-SBC, 8 BRI, 16 VoIP Calls or 4 SIP-SIP Calls (SIP b2b UA) upgradeable (max. 200), 8by  PATTON
 |  |  |  
					|  |  
						
							
								
  2/4/8 Ports Quality ISDN VoIP—2, 4 or 8 ISDN BRI S0 ports. Up to 16 G.722 or up to 16 T.38 or G.711 calls simultaneously. Using SRTP, up to 10 simultaneous calls.Full Telephony Features—SessionRouter™ allows flexible call routing and numbering plan adaptations, CLIP/CLIR, hold, transfer, 3-way conferencing (Roadmap) and much more.SIP Registrar - License is included in ALL eSBC products.Management & Provisioning—Web-based management, WEB Wizard, SNMPv3, command line interface, auto-provisioning separate config domain support, secure provisioning for configuration and software upgrades.Complete Access Routing—Two 10/100/1000 Ethernet ports with auto MDI-X. Ethernet Layer 2 switching and bridging. Access router with NAT, Policy Based Routing, Stateful Firewall, PPPoE, DHCP, DynDNS.Access link redundancy —Through USB port, using 3G/4G Cellular Modem moduleWAN Broadband Access — VDSL 2 & ADSL2+ and G.SHDSL-EFM/ATM Broadband WAN interface.
Full VoIP protocol support—SIPv2, SIP v2 over TLS, ISDN, DSS1, QSIG***, T.38, G.722 HD voice, RTP Security with SRTP, fax and modem bypass, DTMF relay. SIP to SIP transcoding for up to 4 calls.Outstanding Interoperability—Interoperable for voice and T.38 fax with leading SIP service providers, softswitch vendors, and Asterisk™ IP-PBX.High Precision Clock (HP) Option—DECT PBX interoperability and improved fax performance with Stratum 3 CO quality clock (HP)**.Supported by SmartNode™ Redirection Service—A free service enabling zero-touch mass deployments for Service Providers and Distributors with auto-provisioning servers (Learn More).
Why SmartNode™? 
								
									
  
    Patton QualityMade in the USAUnrivalled Customer SupportFREE Support and Upgrades   |  |  |  |  
    | 
	
		
		
The Patton Model SN5531-8BIS16VHP4G-EUI is the perfect choice for All-IP applications where legacy, non-replaceable ISDN equipment has to be integrated in to an UCC environment. For pure All-IP Networks, the SmartNode acts as a service termination point towards the enterprise with an integrated VDSL / ADSL WAN interface. With the separate config domain feature, the SN5530 will be the service demarcation point for SIP Trunk service providers, where the local administrator can be limited to only modify configuration settings facing the LAN IP PBX.  The SN5530 acts as VoIP Gateway, eSBC, Access Router and QoS CPE all in one device.  It can also undertake Network assessment and monitoring at the customer premise by utilizing Patton Cloud network monitoringto prevent, reduce and resolve network and voice quality problems.
 
  
    
      | Voice Signaling | SIPv2 SIPv2 over TLS        SIPv2 over IPv6        SIP call transfer, redirect
 Overlap or en-bloc dialing
 DTMF in-band, out-of-band
 Configurable tones
   |  
      | Call Routing & Services | Regular expression number matching Regular expression number manipulation
 Least Cost Routing
 Number blocking
 Short-Dialing
 Digit collection
 Distribution- and Hunt-Groups
   |  
      | ISDN | 2/4/8 BRI S0 ports**, RJ-45 NT/TE configurable per port
 Built-in line power on each port (total 4W)
 DSS1, Q.921, Q.931. NTT-64
 HP** High Precision Clock Stratum 3 CO
 Point-point and point-multipoint
 Lifeline Bypass Relay***
 Optional QSIG support***
 |  
      | Voice Processing | G.722 G.722.2
 G.711m/A-law
 G.723.1 (6.4 kbps)
 G.729, 729a, 729ab (8 kbps)
 G.726 (16, 24, 32, 40 kbps)        AMR-NB (4.75, 5.15, 5.9, 6.7, 7.4, 7.95, 10.2, 12.2 kbps)        iLBC at 13.33 kbps (SIP-SIP only)
 G.168-2004 echo cancellation (128ms)
 4/8/16 simultaneous low-bandwidth voice or T.38 fax calls
 2/5/10 HD calls with SRTP        2/4/8 SIP to SIP transcoding calls        Transparent ISDN data
 Silence suppression and comfort noise
 Adaptive and configurable dejitter buffer
 Configurable packet length        SIP Registrar
 |  
      | SIP Session Capacity 
 | 4 SIP Sessions, license upgradeable up to 200**** 
 |  
      | Broadband Access | G.SHDSL 4 or 8 wire:  ATM: G.SHDSL ITU-T G991.2, Annex A, B, F, G • Up to 11.4 Mbps • PPPoE • PPPoA, IPoA, 8PVCs, each UBR, CBR or VBR-rt selectable • I.610 OAM F4/F5 support • G.994.1 (G.hs)          EFM mode compliant to IEEE 802.3 G.998.2 • PPP over Ethernet (RFC2516) • Support of OAM PDU information and functionality (ITU-T Y.1731) • OAMPDU event notification, variable request, variable response, and loopback control        ADSL/VDSL:  
          VDSL 2, G.hs, G.Vectoring, up to profile 30a support.             ADSL2, ADSL2+, Annex, A, L, M** or B, J**. IPoA, IPoEoA, PPPoA, PPPoEoA (RFC2364, RFC2516)   |  
      | IP Quality of Service | Voice priority, DownStreamQoS™ Traffic Management, shaping policing
 IEEE 802.1p, IEEE 802.1Q, 4096 VLANs (Tag insertion/deletion), TOS, DiffServ Labeling
 |  
      | Connectivity | Two 10/100/1000Base-T Ethernet ports        Optional WAN interface: ADSL-VDSL, G.SHDSL.bis        USB 2.0 host port for USB Modem Failover Auto-MDIX
 DHCP Client
 PPPoE Client (multi-session)
 IP Multi-Netting, VLAN, Secondary IP
 IPv4, Basic IPv6
 ICMP
 Dynamic and static NAT and NAPT
 ACL, Stateful Firewall
 DNS, DynDNS
 DHCP Server
 SNTP Client
 |  
      | Management | Patton Cloud OrchestratedZero Touch Provisioning        TR-069, TFTP, HTTP, HTTPS configuration up- and downloadCustomizable WebWizard, Web-based GUI, CLI Telnet and HTTP access
 
 TR-069, TFTP, HTTP, HTTPS firmware upgrade, Dual Image
 SNMPv3 agent - MIB II and private MIB
 Separate config domain (LAN side config and WAN side config)
 Built-in diagnostic tools
 Secure Auto-Provisioning with built in root CA
 |  
      | Power Consumption | < 10W |  
      | Mounting | Desktop/Wall-mount plastic chassis 
  Desktop/Wall/Rack-mount metal chassis (8BIS model only) |  
      | Dimensions & Weight 
 |  Plastic enclosure (2-4BIS models): Dimensions: 8.2w x 1.3h x 6.5d inch (20.82w x 3.302h x 16.51d cm)
 Weight: Boxed: 2.15lbs (975g) Un-boxed: 0.90lbs (408g)
   Metal enclosure (8BIS model only):           Dimensions: 12.11w x 1.77h x 6.09d inch (30.76w x 4.50h x 15.46d cm) Weight: Boxed: 3.35lbs (1519.5g) Un-boxed: 1.65lbs (748g)    |  
      | Environment | Operating temperature: 32–104°F (0–40°C) Operating humidity: up to 90%, non-condensing
   |  
      | Compliance | FCC Part 15 Class A (US EMC) CE per RTTE 99/5/EC (EMC and LVD)
   |  
      | Safety | EN60950 TBR-3 (ISDN BRI/So)
 |  |  
    |  |  
    |  |  
 |