COVID-19 Response: a note to our customers. 
We're here to help.Learn More>

Login / Register Contact Us
EZBR-Ultra5 - 100Mbps PtP Bridge System- Plug and Play 5GHz, 802.11a/n, 250mW. POE, 75' CAT5 outdoor cables, WMB, US or EU power by Tycon Systems

EZBR-Ultra5 - 100Mbps PtP Bridge System- Plug and Play 5GHz, 802.11a/n, 250mW. POE, 75' CAT5 outdoor cables, WMB, US or EU power
by Tycon Systems

Write a review Write a review
  • High Power Electronics and powerful advanced MIMO antenna
  • True Plug and Play
  • 64 and 128bit WEP, WPA and WPA2 Encryption
  • Web-based configuration
  • Power over Ethernet
  • Transparent Bridge
  • Mfg SKU # : EZBR-Ultra5
    List Price : $509.95
    Our Price : $500.00
    Stock :Call for Availability
    Quantity :

    EZBR-ULTRA5 is the EZ-Bridge-Ultra5™ is a high capacity 100Mbps and high power 250mW outdoor wireless bridge system operating in the 5GHz unlicensed spectrum. The complete system allows for ultra high bandwidth connections between two buildings up to 4 miles or more apart with good line of sight. The 5GHz frequency gives better performance in areas that contain RF interference from multiple wifi access points.

    The EZ-Bridge-Ultra5™ creates a transparent bridge between two sides and passes all network traffic including VPN and DHCP. You can think of it like connecting a CAT5 Ethernet cable between the two points.

    It is the perfect high capacity plug and play solution for connecting the networks in two or more buildings, internet access sharing, remote video surveillance or remote network access. Multiple EZ-Bridge-Ultra5™ units can be connected in a mesh configuration to allow interconnecting more than two sites.

    The system supports 802.11n TDMA and 802.11a OFDM for backward compatibility. The advanced MIMO antenna system offers 22dBi of gain in a compact and visually pleasing package.

    The antenna also offers great front to back performance which helps reduce interference. A snap-on radome is included to protect the antenna from snow, ice, hail and crazy birds who sometimes like to nest in antennas. 

    With its password verification, MAC address authentication, SSID suppression and advanced WPA encryption, the system provides the best available wireless data security.

    Installation is a snap because of the plug and play features which have been built into the system. Just install the antennas and plug in the power supplies. The units will automatically find their peer and create a secure wireless network link. If changes to the pre-configured settings are desired, they can be easily done thru the built-in web interface from any point on either side of the network. There are no drivers or software that need to be loaded to the computer.

    The corrosion resistant bracket system allows mounting to a pole with up to 2.25" diameter or wall mounting using the included wall mount brackets. The bracket provides +/- 20 degrees vertical tilt and unlimited horizontal adjustment. The system comes with Power Over Ethernet power inserters and two rolls of shielded and outdoor rated 75' long CAT5 cable assemblies. The shielded outdoor cable helps to protect against EMI from lightning and ESD from wind.

    The EZ-Bridge-Ultra5™ comes complete with all the electronics that are needed for a point to point wireless network bridge installation; including two powerful 22dBi 802.11a/n MIMO antennas with built-in high power electronics, Bracket Kits which accommodate pole or wall mounting, Two Cat5e rated PoE (Power Over Ethernet) power inserters and two 75' Shielded Outdoor Rated CAT5 cable assemblies.

    Data Rates 6-150 Mbps
    Operating Distance up to 12miles line of sight
    Standards IEEE802.11n, 802.11g, 802.3, 802.3u
    Power Requirements Power Supply: 100-240VAC 50/60Hz EZ-Bridge Ultra2-LR™: 12VDC to 24VDC
    Av. Power Consumption: 5.5W
    Regulatory Certifications FCC Part 15 / UL
    RF Frequency Band 5180 ~ 5825 MHz
    Available Transmit Power 802.11g/n: 4 to 23dBm
    Modulation Technology 802.11g: OFDM 802.11n: TDMA
    Operating Channels 5GHz 12 channels supported at 40MHz width
    Receive Sensitivity (Typical) 802.11a/n: -96 +/-2dB @ 14Mbps 802.11n: -75 +/-2dB @ 300Mbps
    Antenna 5GHz 22dBi Dish Antenna, 8 deg AZ and 8 deg EL Beamwidth, >23dB front to back
    Network Topology Ad-Hoc, Infrastructure
    Operation Modes Point to Point Bridge, Access Point, Client Bridge or Router
    Processor Atheros MIPS 24KC 400Mhz
    Interface 10/100Mbps RJ-45 LAN Port
    Memory 32MB SDRAM, 8MB Flash
    IP Auto Configuration DHCP Client
    Security MAC Address Filtering, WEP/WPA encryption, Hide SSID in beacons, Layer 2 isolation
    Management Configuration Web-based configuration (HTTP) Console configuration (SSH) SNMP Protocol
    Firmware Upgrade Upgrade firmware via web browser
    Antenna Physical Dimensions (diameter x D) 326mm dia x 254mm depth (12.84” dia x 10”)
    Complete System Weight 8.6 kg (19 lbs)
    Temperature Range

    Operating: -30°C to 75°C (-22°F to 167°F)

    Storage: -40°C to 80°C (-40°F to 176°F)

    Copyright © 2022 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.