08000514 IRG7440 5G Router: 5G NR & CAT20 LTE (4.5Gbps/660Mbps), MIMO & GPS/GNSS, 4 x 10/100/1000 RJ45 Ethernet, USB-C Port
by PERLE

Perle 08000514 IRG7000 5G Routers and Gateways have the most comprehensive set of features, functionality, and performance to provide primary or back-up 5G connectivity to remote infrastructure and assets. These ultra-low-power, rugged, high-performance Cellular Routers can be quickly and easily deployed using an intuitive web GUI. For advanced admin scrips, RESTFul API and CLI commands are also available.

Perle IRG7000 5G Routers provide fast, secure, and reliable managed 5G network connectivity where wired options are impossible to deploy or require a backup. This is crucial for enabling a wide range of applications while ensuring the highest degree of security to protect the integrity of critical services. Reduce the cost of downtime and service calls, and bringing distributed sites online faster. With support for Data, SMS, Voice, and Video, an IRG7000 and can be integrated into any enterprise cloud, building, industrial, or mobile location network infrastructure.

• Building and process automation controllers, Internet of Things (IoT)
• Smart grid assets (meters, switches, controllers), Telco infrastructure controllers
• SCADA, Distribution management systems, Remote data loggers, flow meters, sensing equipment
• Digital signage, ATMs, POS, Kiosks, Temporary "pop-up” stores
• Video surveillance controllers, IP cameras, Mobile hotspots
• Fleet management, GPS/GNSS Location tracking, Taxis, Public Service Vehicles, vehicle area networking (VAN)
• Public Service Vehicles, First responders, Command Centers
• Transit systems, Buses, Metro Subways, Railways

Edge Routers with Enterprise-Grade Routing Capabilities

Perle does not charge any annual subscription or license fees to maintain operation, download software updates, or access features. IRG7000 routers have all the of the routing functionality found in the most advanced enterprise routers included in the base price of the product. Extensive routing protocol support means they can be easily deployed in hierarchical or large mesh network structures. A fast CPU and lots of memory ensure the router can handle a consistent and heavy workload all day long.

• RIP, RIPv2, RIPng, OSPFv1/2/3, BGP-4, VRRP
• When BGP peering with multiple ISPs, the IRG5500 delivers carrier-grade routing performance capable of handling the full Internet routing table
• IPv4 & IPv6
• OpenVPN & IPSec VPN
• DHCP & DHCPv6
• IP Passthrough for deployments requiring the router to operate in Gateway or Bridge mode
• Route between any interface (Cellular, Ethernet, USB, or serial RS232)
• Reduce unwanted network traffic by creating collision and/or broadcast domains

Integrated Zone-Based Policy Firewall

The IRG7000 built-in firewall offers intuitive policies for multiple-interface routers to protect inside networks from unauthorized access by users on an outside network. The firewall also protects inside networks from each other, for example, by keeping a human resources network separate from a user network. If there are network resources that need to be available to an outside user, such as a web or FTP server, these resources can be placed on a separate network behind the firewall, in a demilitarized zone (DMZ). The firewall will allow limited access to the DMZ, but because the DMZ only includes the public servers, any attacks there will not affect the inside network. The firewall controls when inside users access outside networks (for example, access to the Internet), by allowing only certain addresses out, by requiring authentication or authorization, or by coordinating with an external URL filtering server. A deny-all (blacklist) policy can be used to prohibit traffic between firewall security zones until an explicit policy is applied to allow desirable traffic.  Router ports are assigned to zones and firewall inspection policies are applied to traffic moving between the zones. Firewall inter-zone policies come with considerable flexibility and granularity so that different firewall inspection policies can be applied to the same router port.

High Availability Access and Enhanced Security with 2 Factor Authentication

With multiple concurrent VPN sessions and 2 Factor Authentication, Perle IRG7000 Routers enable secure communications to multiple back-end systems.

• Remote authentication (RADIUS, TACACS+, LDAP) management, integrates with enterprise-grade systems to control access to devices in the field.
• Software image CRC control protects the software upgrade process against unwanted software corruption and malware
• High-speed OpenVPN, IP Security (IPsec), Triple Data Encryption Standard (3DES), and Advanced Encryption Standard (AES) encryption for data privacy over the Internet.
• Intrusion prevention enforces security policies in a large enterprise or service provider networks.
• Perle's cloud-based centralized management solution puts all your network and IT infrastructure into a single application and provides secure reliable access and visibility during normal operations and critical network failures. Scalable to suit any business requirement, Cloud Centralized Management reduces human error and guarantees repeatability.

GPS / Global Navigation Satellite System (GNSS) Included

GNSS (GPS, Galileo, and Glonass) are included by default in all IRG7000 Routers and Gateways. This enables real-time location tracking of remote assets. Also, you can get real-time network clock updates in the router, or any attached equipment, for accurate time-stamp usage in time-sensitive applications.

Cutting-edge design certified for a wide range of deployment scenarios

High-performance components and features enable customers to take advantage of broadband network speeds while running secure concurrent data, voice, and video services. All IRG7000 routers have high MTBF rates because they are developed with certified high-end components to provide superior reliability and uninterrupted operation.

 

 

 

Cellular
LTE	5G: 4.5Gbps downlink and 660Mbps uplink speeds 4G/LTE (Cat-20), 3G fallback
Frequency Bands	5G Sub-6 GHz: n1, n2, n3, n5, n28, n41, n66, n71, n77, n78, n79 4G LTE: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B18, B19, B20, B21, B25, B26, B28, B29, B30, B32, B34, B38, B39, B40, B41, B42, B43, B46, B48, B66, B71 3G HSPA/HSPA+ Bands:B1, B2, B3, B4, B5, B6, B8, B9, B19 Data & SMS Operation over 5G with fallback networks 4G/LTE, 3G HSPA+ / HSPA+ / HSPA / UMTS (WCDMA)
5G/LTE Antenna	Frequency Range: 704-960 / 1710-2700 / 3300 / 5150-5850 MHz Peak Gain: 3.07 dBi Impedance: 50 ohm Voltage Standing Wave Ratio: < 3.0 (typical) Radiation: Omni-Directional Connector: SMA Male (Swivel) Dimensions: 144 x 13 mm / 5.67 x 0.51 in
SIM	Mini-SIM 15 x 25mm (or 2FF )
GPS / GNSS
GPS / GNSS	Wide-band GNSS: 1559-1606 MHz GPS: 1575.42 MHz / GLONASS: 1602 MHz / BeiDou: 1561.098 MHz / Galileo: 1575.42 MHz / QZSS: 1575.42 MHz Simultaneous tracking: Up to 30 channels Reports: NMEA 0183 V3.0, TAIP
GPS / GNSS Passive Antenna	GNSS Applications: GPS, Glonass, Galileo Frequency Range: 1561MHz~1606 MHz Gain: 4 dBi (typical) Impedance: 50 Ohm Voltage Standing Wave Ratio: 2.0 (typical) Polarization: RHCP SMA (M) straight Dimensions: 41.9 x 47.3 x 16.3 mm / 1.65 x 1.86 x 0.64 in RG-174 Cable Lenght: 5 m / 16.4 ft
Ethernet Ports
Type	4 x 10/100/1000 Ethernet RJ45 Copper
Speed	Software selectable 10/100/1000 Ethernet, Auto Software selectable Half/Full/Auto duplex
Ethernet Isolation	1.5Kv Magnetic
Standards	IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow Control
Processing Type	Store and Forward
MAC Address Table Size	8K
VLAN ID range	1 to 4000
USB-C Port
Type	1 x USB Type-C Configurable for Console over USB, GNSS streaming
Serial Port
RS232 Serial	1 x DB9 female connector Serial Port Speeds: 300bps to 230Kbps with customizable baud rate support Data Bits: 5,6,7,8-bit protocol support Parity: Odd, Even, Mark, Space, None Flow Control: Hardware, Software, Both, None Serial Port Protection: 15Kv Electrostatic Discharge Protection ( ESD ) Processing Type - Store and Forward
RS485 Serial	half-duplex
Power and Auxillary Connectors
One GPIO Input	Digital Input & Pulse Counting VDC: 0 for ≤ 1V, 1 for ≥ 2.7V Dry Contact Max Current range: min 0.6mA @ 7V and max 3.5mA @ 36V Current Sink Output: 0.5A @ 12v
Ignition Sense	Analog Input: 0.5V to 36V
Two Digital Inputs	Digital Input & Pulse Counting VDC: 0 for ≤ 1V, 1 for ≥ 2.7V
One Alarm Relay	Normally Open (NO) dry contact: 1A @ 24VDC
Platform Specifications
Microprocessor	Dual Core ARM 1.2GHz
RAM	1GB DDR4
Flash	4GB MMC
LED Indicators	Power: indicates power status Serial: indicates serial RS232 connection status and Tx data 5G WWAN: indicates Wireless Wide Area Network status 4G/3G WWAN: indicates Wireless Wide Area Network status GNSS: indicates Global Navigation Systems for GPS, Galileo, Glonas and Beidou status Internet: indicates Internet connectivity
Environmental Specifications	Operating Temperature: -40°C to 70°C / -40°F to 158°F Storage Temperature: -40°C to 85°C / -40°F to 185°F Operating Humidity: 0% to 95% non-condensing Storage Humidity: 0% to 95% non-condensing Operating Altitude: 3048 m / 10,000 ft MTBF: 203,020 (Calculation model based on MIL-HDBK-217-FN2 @ 30°C/86°F) Heat Ouput (BTU/HR): 22.2
Enclosure	Die-Cast Aluminium
Mounting	DIN Rail (Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175 vertically or horizontally) Panel / wall mount attachement bracket is optional
Ingress Protection Rating	IP54
Power
Power Input	12/24 VDC Nominal (7 to 36 VDC Range)
Power/Current Consumption	Standby (no activity / all ports shutdown): 4.3mA / 52mW Idle Mode (connected/no Activity): 0.41A / 5W Typical Use (connected/with Activity): 0.54A / 6.5W Note: up to 0.08A / 1W more in power savings can be achieved through shutting down the USB port, LEDs, GPS, as well as turning down router processor speed
Ignition Sense	VDC voltage variation with On/Off and timer
Power Connector
External Power Supply (optional)	110 / 220 VAC Power supply
Power Line Protection	Surge: 8KV (EN61000-4-5 common mode), 2KV (EN61000-4-5 differential and common modes)
Vehicle Transient voltage protection	Built-in protection against voltage transient including 5 VDC engine cranking and +200 VDC load dump
Reverse polarity protection	YES
Weight & Dimensions
Product Weight & Dimensions	Weight: 0.58kg / 1.28lbs Dimensions: 146 x 99 x 45 mm / 5.75 x 3.89 x 1.77 in
Shipping Weight & Dimensions	Weight (with Antenna):1.03 Kg / 2.27 lb Weight (without Antenna): 0.97 Kg /2.14 lb Dimensions: 270 x 170 x 70 mm / 10.63 x 6.70 x 2.75 in
Regulatory Approvals
Cellular/Telecom Regulatory Approvals	FCC/ICES, RED, PTCRB/CTIA, CE
Carrier Certifications	AT&T, Verizon
Shock & Vibration	MIL-STD-810G (Shock: test method 516.6. Operational Vibration: test method 514.6)
Emissions	FCC 47 Part 15 Subpart B, Class A ICES-003 Issue 6 Class A (Canada) ANSI C63.4 Class A (Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz) EN61000-3-2: 2014 (Limits for Harmonic Current Emissions) EN61000-3-3: 2013 (Limits of Voltage Fluctuations and Flicker) EN 61000-6-4: 2007 + A1: 2011 CISPR 32:2015/EN 55032:2015 Class A (Electromagnetic compatibility of multimedia equipment - Emission requirements)
Immunity	CISPR 35:2016/EN 55035:2017 (IR) EN 61000-4-2:2009 (ESD) +/-8 kV (Contact), +/-15 kV (Air) Operating mode: powered on EN 61000-4-3: 2006 + A1:2007 + A2:2010(RS) EN 61000-4-4:2012 (EFT) 2 KV (Criteria A) EN 61000-4-5:2014+AMD1:2017 (Surge) 2KV (line to earth), 1.5KV (line to line) EN 61000-4-6: 2013 (CS) EN 61000-4-8: 2009 (PFMF) EN 61000-4-9: 2016 (PMF) EN 61000-4-11: 2004 + A1:2017 EN 61000-4-16 EN 61000-6-2 (General Immunity for Industrial Environments)
Safety	CE Mark UL/EN/IEC 62368-1 (including CB) CAN/CSA C22.2 No. 62368-1-14
Cellular / Radio Standards	EN 301 489-1:2019 Ed2.2.3 EN 301 908-25 (Imt Cellular Network: Essential requirements) EN 62311:2020 (Human exposure restrictions for radio frequency electromagnetic fields)
Environmental Specifications	Reach, RoHS3 and WEEE Compliant

08000514.pdf

817 K