|
|
OS2201/1ETH/A/E-EU - Patton OnSite VDSL2/ADSL2+ Single Port Router; 1 x 10/100BaseTX; ADSL Annex A,M,L; External 100-240 VAC; EU by PATTON
|
|
|
- Supports 100-Mbps Asymmetrical Line Rate—Provides near fiber performance for bandwidth intensive applications.
- Operates Over Twisted Pair—Reduces the cost and hassles of new installations. Uses installed voice-grade twisted pairs to eliminate the expense of installing network or fiber cable.
- Flexible Deployment —Supports full ADSL2/ADSL2+ or ADSL+ fallback.
- Firewall —Surf the Internet safely and securely.
- Full VDSL2 Profile Support —Support for 8a, 8b, 8c, 8d, 12a, 12b, 17a, and 30a.
- TR-069 Compliant —Eases management and can reduce hotline costs significantly.
|
|
|
The Patton Model OS2201-1ETH-A-E-EU solutions allow service providers and enterprises to leverage their existing twisted pair for enabling the next generation high speed services and applications. Providing speeds of over 100 Mbps, VDSL2 is the perfect technology for the delivery of high quality triple-play services (IPTV, VoIP, WWW) or for providing high speed data backhaul throughout a campus.
The OS2201 is a small but feature-rich single-port bridge/router that is used for accessing the Internet or private network via a VDSL2/ADSL2+ connection. This connection is delivered by your service provider or, in campus or Multi-Tenant Unit applications, yourprivately owned DSLAM.
The OS2201 is fully compliant with VDSL2 standards—including G.Vector—and supports VDSL2 profiles from 8a to 30a. Because we are standards based, you can count on reliably connecting to Patton’s VDSL2 DSLAM or to a third-party device or service.
This modem may be small, but it packs a punch when it comes to features. The OS2201 supports bridging, static and dynamic routing, IPv4/IPv6, ACLs, TR-069 and a host of firewall/security features that help ensure a safer and more secure Internet experience.
Basic Interfaces |
RJ-11 x 1 (VDSL2/ADSL2+)
RJ-45 x 1 (LAN-10/100BaseTx)
- IEEE 802.3, IEE802.3u
- Auto-Sensing 10/100BaseTX
- Auto-MDI/MDI-X
Reset button x 1
Power button x 1
|
VDSL2/ADSL2+ Compliance
|
ANSI T1.413 Issue 2
G.992.1 (G.dmt)
G.992.2 (G.lite)
G.992.3 (ADSL2, G.dmt.bit)
G.992.4 (ADSL2, G.lite.bis)
G.992.5 (ADSL2+)
G.993.1 (VDSL)
G.993.2 (VDSL2)
G.994.1 (G.hs)
G.Vector
G.998.4 Retransmission
Annex A, M and L (OS2201/A)
Annex B and J (OS2201/B)
VDSL Profile up to 30a supported
Data Transmission Rate (Adaptive @ 32kbps steps)
- Upstream up to 100 Mbps
- Downstream: Up to 150 Mbps
|
PPP/ATM Attributes |
PPP over ATM PVC (RFC 2364)
PPP over Ethernet (RFC 2516)
PPPoE pass through
PPP over AAL5 (RFC 2364)
Classical IP over ATM (RFC 2225)
PPP over Ethernet (PPPoE)
Relay and Client RFC-1483/2684
LLC/VC-Mux bridged/routed mode
PAP, CHAP, MS-CHAP authentication
Up to 8 PVCs for UBR
QoS over CBR, VBR-rt and VBR-nrt and UBR
OAM F4/F5 Loopback |
Bridging/Networking (Layer 2)
|
IEEE 802.1d transparent bridging
Dynamic learning of MAC addresses
DHCP Server/Client/Relay |
Management |
Web GUI
Easy Configuration CD-ROM
Firmware upgrades through HTTP, TFTP
Configuration File Backup and Restore
Telnet
SNTP
TR-069 Remote Management |
Routing (Layer 3+) |
IPv4/IPv6
NAT Static Port Mappings, NAT/NAPT
Static route, RIP v1/v2
MAC Encapsulation Routing
IGMP Proxy v1/v2 Multicast
IGMP snooping v1/v2
DNS Relay
Dynamic DNS
UPnP |
Security |
IP/Port Filtering
MAC Filtering
Denial of Service (DOS)
DMZ
ACL (Access Control List) |
Physical |
Unit Weight: 0.130 kg
Unit Dimensions: 171W X 122H X 39D mm
Packaged (Kit) Weight: 0.370 kg
Packaged (Kit) Dimensions: 130W x130H x86D mm |
Power |
Input: AC 100-240V
Output: 12VDC/max .1A
Consumption: Less than 7W |
Environment |
Operating Temp.: 0 to 40 ºC
Storage Temp.: -40 to 70 ºC |
|
|