|
|
Network Isolator MED MI 1005 Retail
Transmission speed: 10/100/1000 MBit/s • Dielectric strength: 5 kV AC •
Dielectric strength under high-stress conditions: 10 kV AC (10 sec) • Ports: 2 x
RJ45 • full IEEE 802.3 compatibility • Standards: EN 60601-1, EN 60601-1-2, UL
Listed E342310, CE, RoHS, REACH • Including Patch cable 25cm, Manual, and
Covering Box + Serial Number
|
|
|
The flexible and easy option for immediate isolation of medical devices
- Easy to handle, no installation required
- Compact, sleek and universal range of applications
- In less than 5 seconds, patients, users and equipment are protected from
dangerous leakage currents
- No fixed cables. No need to replace the entire isolator in the event of
a faulty network cable
- Lightweight, durable housing. Can be connected to any system with a
network connection
- Inexpensive and efficient operation. No dedicated power supply required
The MED MI 1005 network isolator offers a flexible, easy option for immediately
isolating medical equipment. In less than 5 seconds, patients, users and
equipment are protected from dangerous leakage currents flowing via the data
network.
The passive electronic components do not require a separate power supply and
behave completely transparently on the data network. Therefore, no installation
of drivers or additional software is required.
Including Patch cable 25cm, Manual, Covering Box + Serial Number
Isolation Voltage: |
5.000 V |
Data Speed: |
10/100/1000 MBit/s |
Conformity Ethernet: |
IEEE 802.3 |
Standards approved by: |
IEC 60601-1 (3rd Edition); IEC 60601-1-2 UL 60601 (UL Listed
E342310) |
Connections:: |
2 x RJ45 input / output |
Material: |
UL94V-0 / RoHS-compliant |
Time between failures: |
0.21 x 10 ^ 8 (1 error in 21 million hours) |
|
|