|
|
TGRS-T120-M12X-BP2-WV_SUMMARY.html
Leading EN50155 compliant Ethernet switch for rolling stock applicationSupports static routing and VRRP L3 functionSupports TTDP (IEC 61375-2-5) protocolSupports TRDP (IEC 61375-2-3) protocolEasy network setup with network address translation (NAT)R-NAT (Railway Network Address Translation) for train IP managementProvided HTTPS/SSH protocol to enhance network securitySupports SMTP clientSupports QoS managementIGMP v2/v3 (IGMP snooping support) for filtering multicast trafficSupports SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network ManagementSupports 10K Bytes Jumbo FrameMultiple notification for warning of unexpected eventWeb-based, Telnet, Console (CLI), and Windows utility (Open-Vision) configurationSupports LLDP ProtocolRigid IP-30 housing designWall mounting enabledWide range power input from 24-110VDC
|
|
|
TGRS-T120-M12X-BP2-WV_DESCRIPTION.html
ORing's Transporter managed Router switches are designed for industrial applications such as rolling stock, vehicle, and railway. The TGRS-T120-M12X-BP2-WV managed Router switches are designed for industrial applications such as rolling stock, vehicle, and railway. The TGRS-T120-M12X-BP2-WV, which is compliant with the EN50155 standard, is a managed Gigabit Redundant Ring Ethernet switch with 12x 10/100/1000Base-T(X) ports which is specifically designed for the toughest and fully compliant with EN50155 requirement. The switch supportIEC 61375-2-5 TTDP(Train Topology Discovery Protocol) andIEC 61375-2-3 TRDP(Train Real-Time Data Protocol) for railway application, improving the operational efficiency and minimize configuration errors. It is specifically designed for the toughest industrial environments. TGRS-T120-M12X-BP2-WV EN50155 Ethernet switch uses M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. TGRS-T120-M12X-BP2-WV EN50155 provides a wide power input range from 24 to 110VDC. TGRS-T120-M12X-BP2-WV includes 2 sets of bypass ports that protect the network from failures and Network maintenance by ensuring network integrity during power loss. And support wide operating temperature from -25oC to 70oC. TGRS-T120-M12X-BP2-WV can also be managed centralized and convenient by Open-Vision, as well as the Web-based interface, Telnet and console (CLI) configuration. Therefore, the router switch is one of the most reliable choice for highly-managed and railway application.
TGRS-T120-M12X-BP2-WV.html
Physical ports |
---|
10/100/1000Base-T(X) ports in M12 | LAN: 8 x M12 connector (8-pin X-coding, female) WAN: 4 x M12 connector (8-pin X-coding, female) | RS-232 Serial Console port | RS-232 in M12 connector (5 pin female A-coding) with console cable. 115200bps, 8, N, 1 | LED Indicators |
---|
System Indicator (Status) | Green: System on | Power Indicator (Power) | Green: Power LED x 1 | Ring Master Indicator (R.M.) | Green: Indicates that the system is operating in O-Ring Master mode | O-Ring Indicator (Ring) | Green: Indicates that the system operating in O-Ring mode Green Blinking: Indicates that the Ring is broken.
| Fault Indicator (Fault) | Amber: Indicate unexpected event occurred | 10/100/1000Base-T(X) M12 Port Indicator | Green for Link/Act indicator: Green for link-up, Off for link-down, Blinking for Act. Green for speed indicator: Green for 1000Mbps, Off for 10/100Mbps
| Power |
---|
Power consumption (Typ.) | 17 Watts | Redundant Input power | 24~110 (16.8~137.5) VDC on M12 5-pin A-coding Male connector | Overload current protection | Present | Reverse polarity protection | Present | Protection / Certification |
---|
Safety | EN 60950-1 compliant | Physical Characteristic |
---|
Enclosure | IP-30, Iron | Dimensions (mm) | 260 (W) x 50 (D) x 220 (H)mm10.24 (W) x 1.97 (D) x 8.66 (H) inch | Technology |
---|
Ethernet Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
| MAC Table | 2K (WAN port), 16K (LAN port) | Packet buffer Size | 1MBytes | Priority Queues | 8 | Switch Properties | Switching latency: 0.9 us Switching bandwidth: 24Gbps Throughput (packet per second): 17.857Mpps@64Bytes packet Max. Number of Available VLANs: 256 VLAN ID Range: VID 1 to 4095 IGMP multicast groups: 128 for each VLAN Port rate limiting: User Define
| Jumbo frame | Up to 10K Bytes | Security Features | Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q) to segregate and secure network traffic SNMPv3 encrypted authentication and access security Https / SSH enhance network security Web and CLI authentication
| Software Features | IEC 61375-2-5 TTDP (Train Topology Discovery Protocol) IEC 61375-2-3 TRDP (Train Real-Time Data Protocol) RSTP/MSTP (IEEE 802.1D/w/s) NAT: N-1 NAT, 1-1 NAT TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging IGMP Snooping QoS management Port configuration, status, statistics, monitoring, security DHCP Server/Client SMTP Client
| Network Redundancy | O-Ring (Pending) O-Chain (Pending) MSTP (RSTP/STP compatible)
| Warning / Monitoring System | Relay output for fault event alarming Syslog server / client to record and view events Include SMTP for event warning notification via email Event selection support
| Fault contact |
---|
Relay | Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding, female connector) | Reset Function |
---|
Reset Button | 5 sec: Factory default | Environmental |
---|
Storage Temperature | -40 to 85? (-40 to 185?) | Operating Temperature | -40 to 75? (-40 to 167?) | Operating Humidity | 5% to 95% Non-condensing |
|
l');
?>
|