|
|
|
TRGPS-9084TG-M12X-BP2-MV - EN50155 12-port managed PoE switch; 8GE/PSE + 4 10G TX M12, 2 bypass included, 110VDC
by ORing Industrial Networking
|
|
|
|
TRGPS-9084TG-M12X-BP2-MV_SUMMARY.html
Leading EN50155-compliant Ethernet switch for rolling stock applicationSupport O-Ring(recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy O-Chain allow multiple redundant network ringsSupports IEEE 802.3at compliant PoE and total power budget is 90Watts with maximum 30Watts per portSupport PoE scheduled configuration and PoE auto-ping check functionSupport IEEE 1588v2 clock synchronizationSupport IPV6 new internet protocol versionSupport Modbus TCP protocolSupport IEEE 802.3az Energy-Efficient Ethernet technologyProvided HTTPS/SSH protocol to enhance network securitySupport SMTP clientSupport IP-based bandwidth managementSupport application-based QoS managementSupport Device Binding security functionSupport DOS/DDOS auto preventionIGMP v2/v3 (IGMP snooping support) for filtering multicast trafficSupport SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network ManagementSupport ACL and 802.1x User Authentication for securitySupports 9.6K Bytes Jumbo FrameMultiple notifications for warning of an unexpected eventWeb-based ,Telnet, Console (CLI), and Windows utility ( Open-Vision) configurationSupport LLDP ProtocolWall mounting enabled
|
|
|
TRGPS-9084TG-M12X-BP2-MV_DESCRIPTION.html
ORing's Transporter managed Ethernet switches are designed for industrial applications such as rolling stock, vehicle, and railway. The TRGPS-9084TG-M12X-BP2-MV managed Ethernet switches are designed for industrial applications such as rolling stock, vehicle, and railway. The TRGPS-9084TG-M12X-BP2-MV, which is compliant with the EN50155 standard, is a managed 10G Redundant Ring Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x1G/2.5G/5G/10GBase-T(X) ports which are specifically designed for the toughest and fully compliant with EN50155 requirement.
The switch supports Ethernet Redundancy protoco g>O-Ring(recovery time < 30ms over 250 units of connection), O-Chain and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. It is specifically designed for the toughest industrial environments. TRGPS-9084TG-M12X-BP2-MV EN50155 Ethernet switch uses M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock.
TRGPS-9084TG-M12X-BP2-MV also supports Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each TRGPS-9084TG-M12X-BP2-MV switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection.
And support wide operating temperature from -40 oC to 75 oC. TRGPS-9084TG-M12X-BP2-MV can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choices for highly-managed and Ethernet applications.
TRGPS-9084TG-M12X-BP2-MV.html
Physical ports |
|---|
| 10/100/1000Base-T(X) ports with P.S.E. in M12 | 8 x M12 connectors (8-pin X-coding, female) | | 1000/10GBase-T ports in M12 | 4 x M12 connectors (8-pin X-coding, female) | | RS-232 Serial Console port | RS-232 in M12 connector (female A-coding). Baud rate setting: 115200bps, 8, N, 1 |
LED Indicators |
|---|
| 1G/10GBase-T M12 Port Indicator | Top dual color LED for Ethernet speed indicator: Green LED for 10Gbps, Amber for 1Gbps
Middle dual color LED for Ethernet speed indicator: Green LED for 5Gbps, Amber for 2.5Gbps
Bottom Green LED for port Link/Act indicator | | Power Indicator (Power) | Green: Power LED x 1 | | Ring Master Indicator (R.M.) | Green: Indicates that the system is operating in O-Ring Master mode | | O-Ring Indicator (Ring) | Green: Indicates that the system operating in O-Ring mode
Green Blinking: Indicates that the Ring is broken. | | Fault Indicator (Fault) | Red: Indicate unexpected event occurred | | 10/100/1000Base-T(X) M12 P.S.E. Port Indicator | Top dual color LED for Ethernet speed indicator: Green LED for 1Gbps, Amber for 100Mbps, Off for 10Mbps
Middle Green LED for PoE enable indicator
Bottom Green LED for port Link/Act indicator
|
Power |
|---|
| Power consumption (Typ.) | 41 Watts (PoE output not include) | | Redundant Input power | 72/110 (50.4~137.5) VDC on 4-pin male S-coding connector | | Total PoE Output Power | 60 watts Max. | | Overload current protection | Present | | Reverse polarity protection | Present |
Protection / Certification |
|---|
| Safety | EN 60950-1 |
Physical Characteristic |
|---|
| Enclosure | IP-30, Iron | | Dimensions (mm) | 438 (W) x 250 (D) x 44 (H) mm17.24 W) x x9.84 (D) x 1.73(H) inch | | Weight (g) | 3185 g |
Technology |
|---|
| Ethernet Standards | IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3bz for 2.5G/5GBase-T
IEEE 802.3an for 10GBase-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
IEEE 802.3af PoE specification (up to 15.4 Watts per port for P.S.E.)
| | MAC Table | 32K | | Packet buffer Size | 32Mbits | | Priority Queues | 8 | | Processing | Store-and-Forward | | Switch Properties | Switching latency: 7 us
Switching bandwidth: 96Gbps
Max. Number of Available VLANs: 4095
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
| | Jumbo frame | Up to 10.2K Bytes | | Security Features | Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security | | Software Features | STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP | | Network Redundancy | O-Ring
O-Chain
MRP
MSTP (RSTP/STP compatible) | | Warning / Monitoring System | Relay output for fault event alarming
Syslog server / client to record and view events
Include SMTP for event warning notification via email
Event selection support |
Fault contact |
|---|
| Relay | Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding, female connector) |
Reset Function |
|---|
| Reset Button | 5 sec: Factory default |
Environmental |
|---|
| Storage Temperature | -40 to 85? (-40 to 185?) | | Operating Temperature | -40 to 75? (-40 to 167?) | | Operating Humidity | 5% to 95% Non-condensing |
|
l');
?>
|
