|
|
TXES-150-M12_SUMMARY.html
Leading EN50155-compliant Ethernet switch for rolling stock applicationProvided 5x10/100/500Base-T(X) portsSupports auto-negotiation and auto-MDI/MDI-XSupports store and forward transmissionSupports flow controlM12 connectors to guarantee reliable operation against environmental disturbancesRigid IP-30 housing designWall mounting enabled
|
|
|
TXES-150-M12_DESCRIPTION.html
ORing's TransporterTM series un-managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications.\xa0 The TXES-150-M12 un-managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications.\xa0 The TXES-150-M12 is an unmanaged Ethernet switch with 5x10/100/500Base-T(X) which is specifically designed for the toughest and fully compliant with EN50155 requirements.\xa0 TXES-150-M12 EN50155 Ethernet switch uses M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock.\xa0 In addition, the wide operating temperature range from -40oC to 75oC can satisfy most of the operating environment.\xa0 The TXES-150-M12 can be easily adopted in all kinds of applications and provides the most rugged solutions for your network.\xa0 Therefore, the switch is one of the most reliable choices for rolling stock Ethernet applications. While installed in the train, TXES-150-M12 is mainly used for in-train monitoring and Entertainment service due to its high-speed Ethernet connection. Devices connected will be IP camera or CCTV for the use of train surveillance. As an unmanaged Ethernet Switch, TXES-150-M12 is not able and will not be used for any control-related application. Its main function is simply forwarding the Ethernet packet from one Ethernet-based device to another Ethernet device which is all connected to the Switch.
TXES-150-M12.html
Specifications |
ORing Switch Model |
TXES-150-M12 |
Physical Ports |
- |
10/100/500Base-T(X) Ports in M12 Auto MDI/MDIX |
5 (4-pin female D-coding) |
Technology |
- |
Ethernet Standards |
IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3x for Flow control
|
MAC Table |
4K |
Packet buffer |
1.5Mbits
|
Processing |
Store-and-Forward |
Switch Properties |
Switching latency: 7 �s Switching bandwidth: 1Gbps Throughput (packet per second):
744Mpps@64Bytes packet
|
LED Indicators |
- |
Power Indicator |
Green: Power LED x 1 |
10/100/500Base-T(X) M12 Port Indicator
|
Top green LED for 10/100Mbps port Link/Act indicator: On for link-up, Off for link-down, Blinking for
active. Bottom green LED for 500Mbps port Link/Act indicator: On for link-up, Off for link-down,
Blinking for active.
|
Power |
- |
Input Power |
12-48 VDC on 4-pin M12 A-coded male connector *NOTICE: For EN50155 applications, it supports
24VDC power input only. |
Power Consumption (Typ.) |
2 Watts |
Overload Current Protection |
Present |
Reverse Polarity Protection |
Present |
Physical Characteristics |
- |
Enclosure |
IP-30 |
Dimensions (W x D x H) |
88.9 (W) x 40 (D) x178.2 (H) mm 3.5 (W) x 1.57 (D) x 7.02 (H) inch |
Weight (g) |
488 g |
Environmental |
- |
Storage Temperature |
-40 to 85C (-40 to 185F) |
Operating Temperature |
-40 to 75C-(-40 to 167F) |
Operating Humidity |
5% to 95% Non-condensing |
Regulatory Approvals |
- |
EMC |
CE EMC (EN 55035, EN 55032), FCC Part 15 B, EN 50155(EN 50121-1, EN 50121-3-2) |
EMI |
EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A |
EMS |
EN 55035 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN 61000-4-4 (EFT), IEC/EN 61000-4-5
(Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP))
|
Shock |
IEC60068-2-27 |
Free Fall |
IEC60068-2-31 |
Vibration |
IEC60068-2-6 |
Safety |
EN 62368-1 (LVD) |
Other |
EN 50155 (IEC 61373) |
MTBF |
1,585,397 hrs. |
|
|