|
|
EDS-4008-4P-2GT-2GS-LVA - Managed Gigabit Ethernet switch with 4 10-100BaseT(X) ports with 802.3bt PoE, 2 10-100-1000BaseT(X), 2 by MOXA
|
|
|
EDS-4008-4P-2GT-2GS-LVA_SUMMARY.html
- Developed according to the IEC 62443-4-1 and compliant with the IEC 62443-4-2 industrial cybersecurity standards
- Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches) If the port link speed is 1 Gigabit or higher, the recovery time is < 50 ms. , and RSTP-STP for network redundancy
- Support for IEEE 802.3bt PoE for up to 90 W output per port
- Wide range of power input options for flexible deployment
- Compact and flexible housing design to fit into confined spaces
- Supports MXstudio for easy, visualized industrial network management
|
|
|
EDS-4008-4P-2GT-2GS-LVA_DESCRIPTION.html
The EDS-4008
Series is a range of 8-port managed Fast Ethernet switches with the
option for four 1 Gbps uplink ports or two 100M ST-SC fiber-optic
ports. This Series also offers models with four 10-100BaseT(X) 802.3af
(PoE), 802.3at (PoE+), and 802.3bt-compliant Ethernet PoE port options
to connect high-bandwidth PoE devices.
EDS-4008-4P-2GT-2GS-LVA.html
Ethernet Interface
-
PoE Ports (10-100BaseT(X), RJ45 connector)
-
10-100-1000BaseT(X) Ports (RJ45 connector)
-
100-1000BaseSFP Slots
-
Standards
- IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3ab for
1000BaseT(X) IEEE 802.3z for 1000BaseX IEEE 802.3x for flow control IEEE 802.3ad for
Port Trunk with LACP IEEE 802.1Q for VLAN Tagging IEEE 802.1D-2004 for Spanning Tree
Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1p for Class of
Service IEEE 802.1X for authentication
Ethernet Software Features
-
Filter
- GMRP
GVRP GARP 802.1Q VLAN IGMP Snooping v1-v2-v3 IGMP Querier
-
Management
- IPv4-IPv6
Flow control Back Pressure Flow Control DHCP Server-Client ARP
RARP LLDP Port Mirror Linkup Delay SMTP SNMP Trap SNMP Inform
SNMPv1-v2c-v3 RMON TFTP SFTP HTTP HTTPS Telnet Syslog Private
MIB
-
MIB
- P-BRIDGE MIB
Q-BRIDGE MIB IEEE8021-SPANNING-TREE-MIB IEEE8021-PAE-MIB
IEEE8023-LAG-MIB LLDP-EXT-DOT1-MIB LLDP-EXT-DOT3-MIB SNMPv2-MIB RMON MIB Groups
1, 2, 3, 9
-
Redundancy Protocols
- STP
RSTP Turbo Ring v2 Turbo Chain Ring Coupling Dual-Homing Link
Aggregation MSTP
-
Security
- Broadcast storm protection
Rate Limit Trust access control Static Port Lock MAC
Sticky HTTPS-SSL SSH RADIUS TACACS+ Access control list Login and
Password Policy
-
Time Management
- SNTP
NTP Server-Client NTP Authentication
-
Protocols
- IPv4-IPv6
TCP-IP UDP ICMP ARP RARP TFTP DNS NTP Client DHCP
Server DHCP Client 802.1X QoS HTTPS HTTP Telnet SMTP
SNMPv1-v2c-v3 RMON Syslog
Switch Properties
-
MAC Table Size
-
Jumbo Frame Size
-
Max. No. of VLANs
-
VLAN ID Range
-
IGMP Groups
-
Priority Queues
-
Packet Buffer Size
LED Interface
-
LED Indicators
- PWR1, PWR2, STATE, FAULT, MSTR-HEAD, CPLR-TAIL, SYNC
Serial Interface
-
Console Port
- RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)
USB Interface
Input-Output Interface
-
Alarm Contact Channels
- 1, Relay output with current carrying capacity of 1 A @ 24 VDC
-
Digital Input Channels
-
Digital Inputs
- +13 to +30 V for state 1
-30 to +3 V for state 0 Max. input current: 8 mA
-
Buttons
DIP Switch Configuration
-
DIP Switches
- Turbo Ring, Master, Coupler, Reserve
Power Parameters
-
Connection
- 2 removable 4-contact terminal block(s)
-
Pre-installed Power Module
-
Note
- The EDS-4008 Series supports modular power supplies. The model names and power parameters are
determined by the installed power module.
For example: EDS-4008-T + PWR-100-LV =
EDS-4008-LV-T EDS-4008-T + PWR-105-HV-I = EDS-4008-HV-T
If you install a different
power module, refer to the specifications of the corresponding model. For example, if you
replace the power module of the EDS-4008-LV-T with the PWR-105-HV-I, refer to the
specifications of the EDS-4008-HV-T.
-
Input Voltage
-
Operating Voltage
- 44 to 57 VDC (> 52 VDC for PoE+ output recommended)
-
Input Current
-
Power Consumption (Max.)
- Without PoE: 11.22 W
With PoE: Max. 240 W for total PD power consumption @ 48 VDC input
-
Max. PoE Power Output per Port
-
Overload Current Protection
-
Reverse Polarity Protection
Physical Characteristics
-
IP Rating
-
Dimensions
- 55 x 140 x 122.5 mm (2.17 x 5.51 x 4.82 in)
-
Weight
-
Installation
- DIN-rail mounting
Wall mounting (with optional kit)
-
Housing
Environmental Limits
-
Operating Temperature
-
Storage Temperature (package included)
-
Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
-
Industrial Cybersecurity
- IEC 62443-4-1
IEC 62443-4-2
-
Safety
- UL 61010-2-201
EN 62368-1 (LVD)
-
EMC
- EN 55032-35
EN 61000-6-2--6-4
-
EMI
- CISPR 32, FCC Part 15B Class A
-
EMS
- IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V-m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4
kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF
-
Maritime
-
Vibration
-
Shock
-
Freefall
-
Railway
-
Traffic Control
-
Power Substation
- IEC 61850-3
IEEE 1613 Class 1
MTBF
|
|