| Models |
NS-205PF-24V Series |
| Technology |
| Standards |
IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet) |
| Processing Type |
Store & forward; wire speed switching |
| MAC Addresses |
1024 |
| Memory Bandwidth |
3.2 Gbps |
| Frame Buffer Memory |
512 Kbit |
| Flow Control |
IEEE 802.3x flow control, back pressure flow control |
| Ethernet Interface |
| RJ-45 Ports |
10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
| LED Indicators |
Power, Link/Act, Power Device is detected |
| Ethernet Isolation |
1500 Vrms 1 minute |
| +/-4 kV ESD Protection |
Yes |
| Fiber Interface (100 Base-FX; SC/ST type) |
| Multi-Mode |
NS-205PFT/FC
NSM-205PFT/FC
NS-205PFT-24V/FC-24V
NSM-205PFT-24V/FC-24V |
Multi mode fiber cables: 50/125, 62.5/125 or 100/140 μm
Distance: 2 km, (62.5/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -20 dBm
Max. TX Output: -14 dBm
Max. RX Sensitivity: -32 dBm
Min. RX Overload: -8 dBm
Budget: 12 dBm |
| Single-Mode |
NS-205PFCS
NSM-205PFCS
NS-205PFCS-24V/FCS-24V
NSM-205PFCS-24V/FCS-24V |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance: 30 km, (9/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -15 dBm
Max. TX Output: -8 dBm
Max. RX Sensitivity: -34 dBm
Min. RX Overload: -5 dBm
Budget: 19 dBm |
| Single-Mode |
NS-205PFCS-60
NSM-205PFCS-60
NS-205PFCS-60-24V/FCS-60-24V
NSM-205PFCS-60-24V/FCS-60-24V |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance: 60 km, (9/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -5 dBm
Max. TX Output: 0 dBm
Max. RX Sensitivity: -35 dBm
Min. RX Overload: -5 dBm
Budget: 30 dBm |
| Power Input |
| Input Voltage Range |
+18 ~ +32 VDC |
| Power Consumption |
0.24 A @ 24 VDC without PD loading;
3.2 A @ 24 VDC with PD full loading;
4.6 A @ 18 VDC with PD full loading |
| Protection |
Power reverse polarity protection |
| +/-4 kV ESD Protection |
Yes |
| Connector |
3-Pin Removable Terminal Block |
| PoE Technology |
| PoE Compliance |
100% IEEE 802.3af compliant |
| PoE Classification |
PSE (Power Sourcing Equipment) |
| PoE Voltage |
+48 VDC depending on power input |
| PoE Voltage |
Up to 15.4 watts per channel |
| PoE Operation |
Automatic detection and power management |
| PoE Pin assignments |
V+ (Pin 1,2), V- (Pin 3,6) |
| PoE disconnect mode |
DC disconnect |
| Mechanical |
| Casing |
Plastic
(Flammability UL 94V-0) |
| Dimensions (W x L x H) (Unit: mm) |
31 x 157 x 113 |
| Installation |
DIN-Rail Mounting |
| Environment |
| Operating Temperature |
-30 °C ~ +75 °C |
| Storage Temperature |
-40 °C ~ +85 °C |
| Ambient Relative Humidity |
10% ~ 90% RH, non-condensing |
The NS-205PF/NSM-205PF is a 4-port unmanaged PoE (PSE) with 1 fiber port switch; it supports 4 PoE ports which are classified as power source equipments (PSE). The NS-205PF/NSM-205PF makes centralized power supply come true and provides up to 15.4 watts of power per PSE port. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 60 km) transmissions.
