Specifications |
| ORing Switch Model |
IGPS-1082GP |
IGPS-1082GP-24V |
| Physical Ports |
- |
| 10/100/1000Base-T(X) with P.S.E. Ports in RJ45 Auto MDI/MDIX |
8 (P.S.E. with IEEE 802.3at) |
| 100/1000Base-X with SFP port |
2 |
| Technology |
- |
| Ethernet Standards |
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for
1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3af/at PoE
specification
|
| MAC Table |
8k |
| Processing |
Store-and-Forward |
| Processing |
Store-and-Forward |
| Switch Properties |
Switching latency: less than 7us
Switching bandwidth: 20Gbps |
| Jumbo frame |
Up to 9.6K Bytes |
| Packet buffer |
4Mbit |
| LED Indicators |
- |
| Power Indicator (PWR) |
Green : Power LED x 3 |
| Fault Indicator |
Amber : Indicate power failed even warning |
| 10/100/1000Base-T(X) RJ45 PoE Port Indicator |
Green for Link/Act indicator
Green for PoE enable indicator. |
| 100/1000Base-X SFP Port Indicator |
Green for port Link/Act. |
| Fault contact |
- |
| Relay |
Relay output to carry capacity of 1A at 24VDC |
| DIP-Switch |
- |
| DIP-Switch 1 |
Power-2 failed warning : (ON) enable, (OFF) disable |
| DIP-Switch 2 |
Power-1 failed warning : (ON) enable, (OFF) disable |
| DIP-Switch 3 |
DIP switch 3 and 4 (ON) : SFP speed setting to 100Mbps |
| DIP-Switch 4 |
DIP switch 3 and 4 (OFF) : SFP speed setting to 1000Mbps(default) |
| Power |
- |
| Redundant Input power |
Dual DC inputs. 50 ~ 57VDC on 6-pin terminal block. |
Dual DC inputs. 12 ~ 57VDC on 6-pin terminal block. |
| Power consumption (Typ.) |
11W |
11W |
| PoE Power budget |
180W |
60W at 12~24VDC, 120W at 24~57VDC |
| Overload current protection |
Present |
| Reverse polarity protection |
Present |
| Physical Characteristic |
- |
| Enclosure |
IP-30 |
| Dimension (W x D x H) |
54.3(W) x 108.3(D) x 145.1(H) mm (2.13x4.26x5.71 inches.)
|
|
Weight (g)
|
889g |
916g |
| Environmental |
- |
| Storage Temperature |
-40 to 85C (-40 to 185F) |
| Operating Temperature |
-40 to 75C (-40 to 167F) |
| Operating Humidity |
5% to 95% Non-condensing |
| Regulatory approvals |
- |
| EMC |
EN55032, EN55024(CE EMC), FCC Part 15B, EN61000-3-2, EN61000-3-3 |
| EMI |
CISPR 32, EN55032, FCC Part 15B class A |
| EMS |
IEC 61000-4-2 (ESD), IEC 61000-4-3 (RS), IEC 61000-4-4 (EFT), IEC 61000-4-5 (Surge), IEC
61000-4-6 (CS), IEC 61000-4-8 (PFMF), IEC 61000-4-11 (DIP) |
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-32 |
| Vibration |
IEC60068-2-6 |
| Safety |
EN60950-1 |
| MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25C ) |
TBD |
TBD |
