Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
 
INJ-101GT++-60W-24V - 1-port Gigabit 60W PoE Injector, IEEE802.3at/LTPoE++, 9-57VDC by ORing Industrial Networking

INJ-101GT++-60W-24V - 1-port Gigabit 60W PoE Injector, IEEE802.3at/LTPoE++, 9-57VDC
by ORing Industrial Networking

Write a review Write a review
INJ-101GT++-60W-24V_SUMMARY.html
  • PoE++ Injector for 1x10/100/1000Base-T(X)
  • Fully compliant with IEEE802.3at/af standard
  • Auto protection for Over Voltage Power Input and over current output
  • Supports totally Power Output up to 60Watts for all ports usage.
  • Support wide range power input, 9 to 57VDC
  • Provided DIP switch configurator for PoE mode management
  • High reliability and rigid IP-30 housing
  • DIN-Rail and Wallmount design
  • Mfg SKU # : INJ-101GT++-60W-24V
    Our Price : $409.00
    Stock : Call for Availability
    Quantity :
    INJ-101GT++-60W-24V_DESCRIPTION.html

    The INJ-101GT++-60W-24V is not only an IEEE802.3at compliant device but also an advanced high power PoE injector. It is intelligent detection that provided 1-ports 10/100/1000Base-T (X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Therefore, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-101GT++ PoE Injector. Typically in Gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. The INJ-101GT++ PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3af/at PoE standards, and provide the DIP switch configurator for High power PoE management.

    INJ-101GT++-60W-24V.html See DataSheet

    l'); ?>
    Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.