TP-DCDC-4824G-HP - Gigabit 36-72VDC IN 24VDC OUT 30W Hi Power DC to DC Converter and Passive PoE injector
by Tycon Systems

Input Voltage +/- 36-72VDC; Output 24VDC Passive PoE
Integrated Gigabit PoE Inserter
High Power 30W
Short Circuit, Over Current and Over Voltage Protection
High Temperature Operation 60°C
Removable Wire Terminal Input for up to 12AWG wires

Description
Specification
Datasheet

TP-DCDC-4824G-HP is the DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 24VDC Power Over Ethernet voltage from a +/-48V battery system.

They have an integrated Gigabit Passive PoE injector to apply the regulated 24VDC to the CAT5 Ethernet cable. The input voltage must be between 36VDC and 72VDC.

They accept data-in to a shielded RJ45 Jack and provide data-out and PoE power on the shielded RJ45 output jack. They work by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-).

They have various protections for surge, short circuit and overload. The units have power output of 30W.

DC Input Voltage	+/- 36 to 72VDC
DC Input Connector	Removeable Screw Type Compression Wire Terminal (12 AWG Max)
DC Output Voltage	24V (Passive)
Data in & Data/POE Output Connector	RJ45 (Shielded)
Output Current (max)	1.25A
Output Power (max)	30W
Self Consumption Power	1W
Efficiency (min)	75%
Line Regulation	1%
Load Regulation	5%
Ripple	1%
Noise	1%

EMC Standards	FCC Class B EN55022 Class B
Safety Standards	UL1950, CSA 22.2 &TUV EN60950
Operating Temp	-30 to +60°C (-22 to +140°F)
Operating Humidity	5% - 90%