| Physical Ports |
|
| 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX with P.S.E. |
8 |
| Gigabit Combo Ports with 10/100/1000Base-T(X) and 100/1000Base-X SFP
port |
2 |
| Technology |
|
| Ethernet Standards |
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1p for COS (Class
of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer
Discovery Protocol)
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) |
| MAC Table |
8192 MAC addressessses |
| Priority Queues |
4 |
| Processing |
Store-and-Forward |
| Switch Properties |
Switching latency: 7 μs
Switching bandwidth: 5.6Gbps
Max. Number of Available VLANs: 4096
IGMP multicast groups: 1024
Port rate limiting: User Define |
| Security Features |
Enable/disable ports, MAC based port security|
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Supports Q-in-Q VLAN for performance & security to expand the VLAN space
Radius centralized password management
SNMP v1/v2c/v3 encrypted authentication and access security |
| Software Features |
STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP v2/v3(support IGMP snooping) for multicast filtering
Port configuration, status, statistics, monitoring, security
SNTP for synchronizing of clocks over network
Support PTP Client (Precision Time Protocol) clock synchronization
DHCP Server / Client support
Port Trunk support
MVR (Multicast VLAN Registration) support |
| Network Redundancy |
O-Ring
O-Chain
Open-Ring
STP
RSTP
MSTP |
| Warning / Monitoring System |
Relay output for fault event alarming
Syslog server / client to record and view events
Include SMTP for event warning notification via email
Event selection support |
| DDM Function |
Voltage / Current / Temperature |
| RS-232 Serial Console Port |
RS-232 in RJ45 connector with console cable. 9600bps, 8, N, 1 |
| LED Indicators |
|
| Power /PoE Indicator |
Green : Power LED x 3, Green : PoE LED x 8 |
| R.M. Indicator |
Green : Indicates that the system is operating in O-Ring mode |
| Fault Indicator |
Amber : Indicates unexpected event occurred |
| 10/100Base-T(X) RJ45 Port Indicator |
Green for port Link/Act. Amber for Duplex/Collision |
| 10/100/1000Base-T(X) RJ45 Port Indicator |
Green for port Link/Act. Amber for 100Mbps indicator |
| 100/1000Base-X / Fiber Port Indicator |
Green for port Link/Act. |
| Fault contact |
|
| Relay |
Relay output to carry capacity of 1A at 24VDC |
| Power |
|
| Redundant Input Power |
Dual DC inputs. 50 ~ 57VDC on 6-pin terminal block |
| Power Consumption (Typ.) |
7.68 Watts (Power consumption of P.S.E. not included) |
| Overload Current Protection |
Present |
| Reverse Polarity Protection |
NOT Present |
| Physical Characteristics |
|
| Enclosure |
IP-30 |
| Dimensions (W x D x H) |
74.3(W)x109.2(D)x153.6(H) mm ( 2.93 x 4.3 x 6.05 inch.) |
| Weight (g) |
1185g |
| Environmental |
|
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Operating Temperature |
-40 to 70°C (-40 to 158°F) |
| Operating Humidity |
5% to 95% Non-condensing |
| Regulatory Approvals |
|
| EMI |
FCC Part 15, CISPR (EN55022) class A, |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5
(Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-32 |
| Vibration |
IEC60068-2-6 |
| Safety |
EN60950-1 |
| Warranty |
5 years |
