|
|
LMP-0602-ST-M-T-V2 - 6-Port Industrial PoE+ Light Layer 3 Managed Ethernet Switch, with 4*10/100Tx (30W/Port) and 2*100Fx by ANTAIRA
|
|
|
LMP-0602-ST-M-T-V2_SUMMARY.html
- Supports 4*10/100Tx IEEE 802.3at/af Compliant with 30W/Port, and 2*100Fx (ST) Fiber Ports
- Fiber Supports: Multi-Mode in 2Km
- Network Redundancy Support: RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
- Configuration: Web Console, Serial, CLI Command
- Supports IGMP v1/v2, up to 256 Groups
- Supports QoS (IEEE802.1p) and CoS/ToS
- Supports IEEE802.1Q VLAN, SNMP v1/v2c
- PoE Ping Alarm Function for PoE Ports Power Recycle
- System Warning Setting for Automatic Warning through E-Mail
- Redundant Power Input Design - 48~55VDC
- Housing: Metal IP 30 rated; DIN-Rail and Wall Mount Support
- Operating Temperature - EOT: -40~75C
|
|
|
LMP-0602-ST-M-T-V2_DESCRIPTION.html
Antaira's LMP-0602-ST-M-T-V2 is a 6-port industrial PoE+ Light Layer 3 managed Ethernet switch that is embedded with 4*10/100Tx Ethernet ports that support IEEE802.3af/at for a maximum of 30 watts per port and 2*100Fx (ST connector) fiber ports with multi-mode (2Km)The LMP-0602-ST-M-T-V2 is a fully manageable industrial Ethernet switch that supports the standard light layer 3 Ethernet configurable settings with a pre-loaded web console. This switch is IP30 rated and DIN-rail mountable and provides operating temperature range model in EOT: -40C to 75C. It also provides a high EFT and ESD protection for any industrial networking application in factory automation, ITS, power/utility, water/wastewater treatment plants, or any outdoor or harsh environmentVersion 2 hardware is compatible with the latest light layer 3 firmware which permits static routes between VLANs.
LMP-0602-ST-M-T-V2.html
Ambient Relative Humidity | 5 to 95%, (non-condensing) | Certifications | FCC, CE, UL 61010-1, 61010-2-201 | Configuration | Http, Https, Telnet, SSH, CLI, TFTP, SNMP v3 | Dimensions | 54 x 142 x 99 mm (W x H x D) | EMI | FCC Part 15 Subpart B Class A CE EN55032/EN61000-6-4 Class A | EMS | CE EN55035/EN61000-6-2 Class A IEC61000-4-2,3,4,5,6,8 | Ethernet Port | 4*10/100Base-TX with PoE+ (30W/Port), auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection | Fiber Port | 2*100Base-FX ST type connector multimode | Flow Control | IEEE 802.3x flow control, back pressure flow control | Free Fall | IEC60068-2-32 | Green | RoHS Compliant | Housing | Metal, IP30 protection | IGMP Group | 1024 | Input Voltage | 48~55VDC Redundant Input | Jumbo Frame | 9.6Kbytes | L2 Switching | Port/MAC/Protocol/IP Subnet-based VLAN, VLAN trunking, GARP/GVRP, Loop Guard, Link Aggregation static/LACP, BPDU guard, Error disable recovery, IGMPv2 snooping, MLD snooping, IGMP filtering, IPMC throttling / filtering leave proxy, DHCP snoo(more...) | L3 Switching | DHCP option82, static routes | LED Indicators | System: Power 1, Power 2, Master, Ring, Fault Ethernet Ports: Speed/Link/Active Fixed Fiber: Link/Active | MAC Table Size | 8K | Memory Buffer | 4Mbits | Mounting | DIN-Rail mounting, Wall mounting | Network Cable | 10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5 cable EIA/TIA-568 100-ohm (100m) | Network Redundancy | STP/RSTP/MSTP, port trunk with LACP, ERPS v1/v2 (<50ms) | Operating Temperature | -40C to 75C | Overload Current Protection | Present | Poe Pin Assignment | V+, V+, V-, V-, for pin 1, 2, 3, 6 (Endspan, Mode A) | PoE Power Budget | 120W@48~55VDC | Power Connection | 1 removable 6-contact terminal block | Power Saving | ActiPHY, PerfectReach, IEEE 802.3az EEE power management | Priority Queues | 8 | Processing Type | Store and Forward | Protocols | IPv4/IPv6, SNMP v1/v2c/v3, LLDP, LLDP-MED, HTTP, HTTPS, SSHv2 telnet, DHCP client, DHCPv6 client, DHCP server, Port Mirror, DNS client/proxy, IP based Access Filter, ICMPv6, syslog, Time Zone / Daylight Saving, NTP client, RMON, sFlow, Loop (more...) | QoS | 802.1p Queueing, Input priority mapping, Storm control for Unicast/Multicast/Broadcast, Port/Queue/ACL policer, Port egress shaper, Queue egress shaper, DiffServ (DSCP), Tag remarking, Scheduler mode | Relay Contact | 24 VDC, 1A resistive | Reverse Polarity Protection | Present | RS232 Serial Console | 1*RS232 in RJ45 | Shock | IEC60068-2-27 | Storage Temperature | -40C ~ 85C | Switching Architecture | Back-Plane (Switching Fabric): 1.2Gbps | System / Diagnostics | Dual Image Protection, PING, PING6 | System Power Consumption | 7.5W | Transfer Rate | 14,880pps for Ethernet Port 148,800pps for Fast Ethernet Port | Vibration | IEC60068-2-6 | VLAN Groups | 4095 | Weight | Unit: 1.9 lbs Shipping: 2.7 lbs |
|
|