Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
NSM-205PSE-12V-4W - NSM-205PSE-12V with providing up to 4 Watts PoE power per port by ICP DAS

NSM-205PSE-12V-4W - NSM-205PSE-12V with providing up to 4 Watts PoE power per port

Write a review Write a review

5-Port 10/100 Mbps PoE (PSE) Ethernet Switch in metal case with 12 VDC Input. Provides up to 4 watts of PoE power per port. Supports operating temperatures from -40°C ~ +75°C


Mfg SKU # : NSM-205PSE-12V-4W
List Price : $519.00
Our Price : $509.00
  • Automatic MDI/MDI-X crossover for plug-and-play
  • NSM-205PSE-12V-4W is a 5-port unmanaged PoE (Power-over-Ethernet) Industrial Ethernet switch that has 4 PoE ports which are classified as power source equipment (PSE). The NSM-205PSE-12V-4W provides up to 4 watts of power per PSE port.

    The NSM-205PSE-12V-4W is designed with a 12 VDC to 48 VDC boost for PoE applications where a 48 VDC power supply is not available.

    • Automatic MDI/MDI-X crossover for plug-and-play
    • Each port supports both 10/100Mbps speed auto negotiation
    • Store-and-forward architecture
    • Full duplex IEEE 802.3x and half duplex backpressure flow control
    • 4 PoE ports with Power Sourcing Equipment (PSE) operation
    • Auto-detection of PD (powered devices) and automatic power management
    • Over-temperature, over-current and over/under-voltage detection
    • Power Input +12 VDC
    • Supports operating temperatures from –40 ~ +75°C
    • DIN-Rail
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward; wire speed switching
MAC Addresses 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE802.3x flow control, back pressure flow control
RJ-45 Ports 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
LED Indicators Power, Link/Act , Power Device is detected
Ethernet Isolation 1500 Vrms 1 minute
Power Input
Input Voltage Range +12 ~ +24 VDC
Power Consumption 0.3A@ 12 VDC without PD loading; 2.2A@ 12 VDC with PD full loading
Protection Reverse Polarity Protection
Connection 3-Pin Removable Terminal Block
PoE Output
PoE Compliance 100% IEEE 802.3af compliant
PoE Classification PSE (Power Sourcing Equipment))
PoE Voltage +48 VDC depending on power input
PoE Power Up to 4 watts per Ethernet port
PoE Operation Automatic detection and power management
Casing Metal (IP30 Protection)
Dimensions (W x L x H) 25 mm x 168 mm x 119 mm
Installation DIN-Rail
Operating Temperature -40°C ~ +75°C (-40°F ~ +167°F)
Storage Temperature -40°C ~ +85°C (-40°F ~ +185°F)
Ambient Relative Humidity 10% ~ 90% RH, non-condensing

Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.