Need assistance or guidance?

Contact us @: 1-800-301-9097 		Login / Register Contact Us
CART
SHOP BY CATEGORY
SHOP BY BRAND

                         

 
Home Ethernet Switches Industrial DIN-Rail Ethernet Switches Unmanaged Switches 10/100 Unmanaged Switches
NSM-206AFT-T - Multi-mode, ST Connector, 4 port 10/100 Mbps PoE with 2 Fiber ports Switch by ICP DAS

NSM-206AFT-T - Multi-mode, ST Connector, 4 port 10/100 Mbps PoE with 2 Fiber ports Switch
by ICP DAS
Write a review Write a review

Multi-mode, ST Connector, 4-Port 10/100 Mbps with 2 Fiber ports Switch, metal case, Supports Input Voltage Range of 12 – 48VDC, has an FT connector, operate up to 75C

 

Mfg SKU # : NSM-206AFT-T
List Price : $529.00
Our Price : $519.00
Stock : Call for Availability
Quantity :


Daisy Chain

Fiber Daisy Chain Configuration

The NS-206AF/NSM-206AF is a 4-port unmanaged Ethernet with 2 fi ber port switch. Using fi ber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 60 km) transmissions. The NS-206AF/NSM-206AF provides a wide 12 to 48 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.

  • Provides 6 x 100-FX fi ber port plus 4 x Ethernet ports
  • Each port supports both 10/100 Mbps speed auto negotiation
  • Full duplex IEEE 802.3x and half duplex backpressure flow control
  • DIN-Rail
  • Automatic MDI/MDI-X crossover for plug-and-play
  • Store-and-forward architecture
  • Redundant dual +12 ~ 48 VDC power inputs
  • Supports operating temperatures from -30 ~ +75°C
Models NS-206AF NSM-206AF
Technology
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward; wire speed switching
MAC Addresses 1024
Memory Bandwidth 2.0 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Ethernet Interface
RJ-45 Ports 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
LED Indicators Power, Link/Act, 10/100M
Ethernet Isolation 1500 Vrms 1 minute
+/- 4 kV ESD Protection Yes
Fiber Interface (100 Base-FX; SC/ST type)
Multi-Mode NS-206AFT-T/FC-T
NSM-206AFT-T/FC-T

Multi mode fiber cables: 50/125, 62.5/125 or 100/140 um
Distance: 2 km, (62.5/125 um recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: - 20 dBm
Max. TX Output: - 14 dBm
Max. RX Sensitivity: -32 dBm
Max. RX Overload: -8 dBm
Budget: 12 dBm 
Single-Mode NS-206AFCS-T
NSM-206AFCS-T		 Single-mode fiber cables: 8.3/125, 8.7/125, 9/125, or 10/125um
Distance: 30 Km, (9/125 um recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: - 15 dBm
Max. TX Output - -8 dBm
Max. RX Sensitivity: -34 dBm
Max. RX Overload: -5 dBm
Budget: 19 dBm
Single-Mode NS-206AFCS-60T
NSM-206AFCS-60T		 Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 um
Distance: 60 Km, (9/125 um recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: - 5 dBm
Max. TX Output - 0 dBm
Max. RX Sensitivity: -35 dBm
Max. RX Overload: -5 dBm
Budget: 30 dBm
Power Input
Input Voltage Range +12 ~ +48 Vdc (Redundant input)
Power consumption 0.14 A@ 24 Vdc
Protection Power reverse polarity protection
+/-4 kV ESD Protection Yes
Connection 6-Pin Removable Terminal Block
Mechanical
Casing Plastic (Flammability UL 94V-0) Metal (IP30 Protection)
Dimensions (W x L x H) 31 mm x 157mm x 113mm 25 mm x 168 mm x 119 mm
Installation DIN-Rail
Environmental
Operating Temperature -30°C ~ +75°C
Storage Temperature -40°C ~ +85°C
Ambient Relative Humidity 10% ~ 90% RH, non-condensing
QUICK LINKS
COMPANY INFO
Payment Types & Security
Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.