Need assistance or guidance?

Contact us @: 1-800-301-9097 		Login / Register Contact Us
CART
SHOP BY CATEGORY
SHOP BY BRAND

                         

 
Home Ethernet Switches Industrial PoE Switches PoE Switches Gigabit Managed PoE Switches
IGPS-R9084GP (L3) - Rugged 8 x 10/100/1000TX (RJ-45) PoE +, + 4x 1000 (SFP) with 1588 compliant with L3 features by ORing Industrial Networking

IGPS-R9084GP (L3) - Rugged 8 x 10/100/1000TX (RJ-45) PoE +, + 4x 1000 (SFP) with 1588 compliant with L3 features
by ORing Industrial Networking
Write a review Write a review
IGPS-R9084GP
  • Supports Layer 3 routing, RIP and static routing function
  • Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
  • Open-Ring support the other vendor's ring technology in open architecture
  • O-Chain allow multiple redundant network rings
  • Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
  • 8 port P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts per port
  • Support PoE scheduled configuration and PoE auto-ping check function
  • Support IEEE 1588v2 clock synchronization
  • Support IPV6 new internet protocol version
  • Support Modbus TCP protocol
  • Support IEEE 802.3az Energy-Efficient Ethernet technology
  • Provided HTTPS/SSH protocol to enhance network security
  • Support SMTP client
  • Support IP-based bandwidth management
  • Support application-based QoS management
  • Support Device Binding security function
  • Support DOS/DDOS auto prevention
  • IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
  • Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
  • Support ACL, TACACS+ and 802.1x User Authentication for security
  • Supports 9.6K Bytes Jumbo Frame
  • Multiple notification for warning of unexpected event
  • Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
  • Support LLDP Protocol
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled

 

IGPS-R9084GP is Layer-3 managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. The IGPS-R9084GP supports Layer-3 routing for better network performance on large-scale LANs into multiple subnets to support long-haul and EMI immunity communications. The hardware Layer-3 switch is optimized to transmit data as fast as Layer-2 switches. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-R9084GP also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-R9084GP switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection and support wide operating temperature from -40°C to 75°C. IGPS-R9084GP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.

Physical Ports  
10/100/1000Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 8
100/1000Base-X SFP port 4
Technology  
Ethernet Standards   IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 8k
Priority Queues 8
Processing Store-and-Forward
Switch Properties Switching latency: 7 us
Switching bandwidth: 24Gbps
Max. Number of Available VLANs: 256
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
Jumbo frame Up to 9.6K Bytes
Security Features Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
Single 802.1x and Multiple 802.1x
MAC-based authentication
QoS assignment
Guest VLAN
MAC address limit
TACACS+
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Web and CLI authentication and authorization
Authorization (15 levels)
IP source guard
Https / SSH enhance network security
Software Features Hardware routing, RIP and static routing
IEEE 1588v2 clock synchronization

IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static)
Multiple Registration Protocol (MRP)
RSTP/MSTP (IEEE 802.1w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
Voice VLAN
IGMP v2/v3 Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/snooping
DHCP Relay
Modbus TCP
DNS client proxy
ARP inspection
SMTP Client
Network Redundancy O-Ring
Open-Ring
O-Chain
MRP
MSTP (RSTP/STP compatible)
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1
LED Indicators  
Power Indicator (PWR) Green : Power LED x 3
Ring Master Indicator (R.M.) Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring) Green : Indicates that the system operating in O-Ring mode
Green Blinking : Indicates that the Ring is broken.
Fault Indicator (Fault) Amber : Indicates PWR1 or PWR2 failure occurred
0/100/1000Base-T(X) RJ45 Port
Indicator		 Dual color LED : Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator
100/1000Base-X SFP port indicator Green for port Link/Act.
PoE Indicator Green : PoE enabled LED x 8
Fault contact  
Relay Relay output to carry capacity of 1A at 24VDC
Power  
Redundant Input Power Dual DC inputs. 50~57VDC on 6-pin terminal block.
Power consumption (Typ.) 19 Watts (PoE output not included)
Overload current protection Present
Reverse polarity protection Not Present
Physical Characteristics  
Enclosure IP-30
Dimensions (W x D x H) 96.4 x 145.5 x 154 mm (3.8 x 5.73 x 6.06 inch)
Weight (g) 1560 g
Environmental  
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 75°C (-40 to 167°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals  
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD)
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-31
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years
QUICK LINKS
COMPANY INFO
Payment Types & Security
Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.