|
|
|
Tycon Systems TP-SW5G-NC - 12-56V 5 port High Power (1A/port) Passive POE Gigabit Switch. POE voltage = Input voltage.
by TYCON SYSTEMS
|
|
|
|
- High Power Gigabit PoE Switch
- PoE Voltage = Input Voltage
- Industrial Temperature Range
- Remotely Power Equipment thru CAT5 Cable up to 100m
- 1A per Port max
- Automatic MDI/MDI-X Crossover
- Automatic Speed and Duplex Sensing
- 1K Self Learning MAC Address Table
- Compact Size
- DIN Rail Mountable with included kit
|
|
|
TP-SW5G-NC: Universal Voltage 10/100/1000MB PoE Switch. Switch accepts a voltage from 12-56VDC and outputs the same voltage to 4 PoE ports. 1A per port.
The unit supplies PoE power to the remote device on Ethernet pins 4,5(V+) and 7,8(V-). The Ethernet spec supports distances up to 100m (328 feet) between the PoE switch and the remote device.
The switch accepts DC power from any power supply. The PoE output voltage equals the DC voltage of the power supply used from 12V to 56VDC. The switch also includes an unpowered uplink port. The switch can be powered through this uplink port with 12V to 56VDC Passive PoE so it can be used as a repeater/extender in a remote location.
| Ethernet Standard |
IEEE802.3/IEEE802.3u |
| Ports |
1 data /P o E input and 4 data/P o E, automatic crossover and polarity |
| Transmission Speed |
1000Mbps / 100 Mbps /10 Mbps Auto - negotiation |
| Switch Technology |
Store and Forward |
| Protocol |
CSMA/CD |
| Flow Control |
IEEE802.3x(full - duplex), Back Pressure(half - duplex) |
| Data Transmission Rate |
1488000pps for 1000baseT, 148800pps for 100baseT, 14880pps for 10baseT |
| Address Table |
1K MAC, self - learning |
| Connections |
Shielded RJ45 |
| POE Output Ports |
Port 1 - 4, auto power management Pin assignment: TX(1,2), RX(3,6), V+(4,5), V - (7,8) |
| Maximum POE Power |
1A per port |
| POE Auto Detection |
Passive P o E |
| POE Protection |
Over Temperature, Over Current, Over/Under Voltage |
| Data Surge Protection |
IEC61000 - 4 - 2 (ESD) ±15kV (air), ±8kV (contact) IEC61000 - 4 - 4 (EFT) 40A (5/50ns) IEC61000 - 4 - 5 (Lightning) 20A (8/20μs) |
| LED’s |
Link (Green On), Activity (Green Blinking ) P o E Detect (Yellow On), P o E Detect Error (Yellow Blinking) Power On (Green On), Power On Alarm (Red On) |
| DC Power Input |
12V to 57VDC, Reverse Polarity Protected. NC Accepts P o E power input on Port 5 |
| Self Consumption |
< 3 Watts |
| Operating Temp |
- 20 to + 7 5°C ( - 4 to 1 67 °F) |
| Operating Humidity (RH) |
5% - 90% (non condensing) |
| Storage Temperature |
- 55 to + 8 5°C ( - 67 to + 185 °F) |
| Dimensions (LxWxH) |
159 x 118 x 40mm (6.3 x 4.6 x 1.6”) |
| Weight |
318g (11oz) |
| Warranty |
2 Years |
|
|
|
|
|
|
