|
|
EDR-G9010-VPN-2MGSFP-HV - 8 GbE + 2 GbE industrial secure router with Firewall/NAT/VPN, 120/220 VDC/VAC, -10 to 60 Degree C by MOXA
|
|
|
EDR-G9010-VPN-2MGSFP-HV_SUMMARY.html
- 10-port Gigabit all-in-one firewall-NAT-VPN-router-switch
- Industrial-grade Intrusion Prevention-Detection System (IPS-IDS)
- Visualize OT security with the MXsecurity management software
- Secure remote access tunnel with VPN
- Examine industrial protocol data with Deep Packet Inspection (DPI) technology
- Easy network setup with Network Address Translation (NAT)
- RSTP-Turbo Ring redundant protocol enhances network redundancy
- Security features based on IEC 62443-NERC CIP
- Supports secure boot for checking system integrity
- -40 to 75C operating temperature range (-T model)
|
|
|
EDR-G9010-VPN-2MGSFP-HV_DESCRIPTION.html
The EDR-G9010 Series is a set of highly integrated industrial multi-port secure routers with firewall-NAT-VPN and managed Layer 2 switch functions. These devices are designed for Ethernet-based security applications in critical remote control or monitoring networks. These secure routers provide an electronic security perimeter to protect critical cyber assets including substations in power applications, pump-and-treat systems in water stations, distributed control systems in oil and gas applications, and PLC-SCADA systems in factory automation. Furthermore, with the addition of IDS-IPS, the EDR-G9010 Series is an industrial next-generation firewall, equipped with threat detection and prevention capabilities to further protect critical infrastructure from cybersecurity attacks.
EDR-G9010-VPN-2MGSFP-HV.html
Input-Output Interface -
Alarm Contact Channels - Resistive load: 1 A @ 24 VDC
-
Buttons -
Digital Input Channels - +13 to +30 V for state 1
-30 to +3 V for state 0 Max. input current: 8 mA Ethernet Interface -
10-100-1000BaseT(X) Ports (RJ45 connector) -
1000BaseSFP Slots -
Standards - IEEE 802.1Q for VLAN Tagging
IEEE 802.3 for 10BaseT IEEE 802.3ab for 1000BaseT(X) Static Port Trunk IEEE 802.3u for 100BaseT(X) IEEE 802.3x for flow control IEEE 802.3z for 1000BaseSX-LX-LHX-ZX Ethernet Software Features -
Broadcast Forwarding - IP directed broadcast, broadcast forwarding
-
Management - Back Pressure Flow Control, DDNS, DHCP Server-Client, Web Console (HTTP-HTTPS), LLDP, QoS-CoS-ToS, SNMPv1-v2c-v3, Telnet, TFTP, HTTPS, SSH
-
Redundancy Protocols -
Routing - Throughput: 350K packets per second (max. 1500 Mbps)
-
Routing Table -
Concurrent Connections -
Connections Per Second -
Routing Redundancy -
Security - Secure Boot, IPsec, L2TP (server), RADIUS, Trust access control
-
Time Management -
Unicast Routing - OSPF, RIPV1-V2, Static Route
-
Multicast Routing -
Filter Switch Properties -
VLAN ID Range -
IGMP Groups -
Max. No. of VLANs LED Interface -
LED Indicators - PWR1, PWR2, STATE, MSTR-H.TC, CPLR-T.TC, VRRP-HA, VPN, USB
DoS and DDoS Protection -
Technology - ARP-Flood, FIN Scan, ICMP-Death, NEWWithout-SYN Scan, NMAP-ID Scan, NMAP-Xmas Scan, Null Scan, SYN-FIN Scan, SYN-RST Scan, SYN-Flood, Xmas Scan
Firewall -
Filter - DDoS, Ethernet protocols, ICMP, IP address, MAC address, Ports
-
Stateful Inspection - Router firewall
Transparent (bridge) firewall -
Deep Packet Inspection - Modbus TCP
Modbus UDP DNP3 IEC 60870-5-104 IEC 61850 MMS Additional protocols will be supported through future firmware updates. -
Intrusion Prevention System - Requires an additional license.
-
Throughput - Max. 350K packets per second (max. 1500 Mbps)
IPsec VPN -
Authentication - MD5 and SHA (SHA-256)
RSA (key size: 1024-bit, 2048-bit) X.509 v3 certificate -
Concurrent VPN Tunnels - Max. 250 IPsec VPN tunnels
-
Encryption - DES, 3DES, AES-128, AES-192, AES-256
-
Protocols - IPsec, L2TP (server), PPTP (client)
-
Throughput - Max. 300 Mbps (Conditions: AES-256, SHA-256)
NAT -
Features - 1-to-1, N-to-1, Port forwarding
Real-Time Firewall - VPN Event Log -
Event Type - Firewall event, VPN event
-
Media - Local storage, SNMP Trap, Syslog server
Serial Interface -
Console Port - RS-232 (TxD, RxD, GND), 3-pin (115200, n, 8, 1)
-
Connector Power Parameters -
Connection -
Input Voltage -
Input Current - 0.08 A @ 240 VDC
0.15 A @ 120 VDC 0.18 A @ 240 VAC 0.28 A @ 120 VAC -
Reverse Polarity Protection Physical Characteristics -
Housing -
Dimensions - 64 x 135 x 105 mm (2.52 x 5.31 x 4.13 in)
-
Weight -
Installation - DIN-rail mounting (DNV-certified), Wall mounting (with optional kit)
Environmental Limits -
Operating Temperature -
Storage Temperature (package included) -
Ambient Relative Humidity - 5 to 95% (non-condensing)
Standards and Certifications -
Safety - IEC 62368-1, UL 62368-1, IEC 60950-1, UL 60950-1
-
EMC -
EMI - CISPR 32, FCC Part 15B Class A
-
EMS - IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V-m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 4 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF -
Power Substation - IEEE 1613, IEC 61850-3 Edition 2.0
-
Shock -
Freefall -
Vibration MTBF Warranty
|
|