Moxa MxNVR-MO4 - 4-channel H.264/MJPEG Industrial Video Recorder, 1 SATA socket, M12 Ethernet connector, 0 to 60 Degree C
by MOXA

Embedded system with low power consumption; no heater and fan required
Transmits and records the H.264 and MJPEG video streams simultaneously
One SATA interface for 2.5” hard disk or SSD (solid state disk)
Meets EN 61373 vibration criteria with a 2.5” inch hard disk installed*
Anti-vibration with built-in M12 Ethernet and power input connector, DB9 audio inputs, and DI/DO connector
T model is compliant with EN 50121-3-2 and the essential sections of EN 50155 (T model supports TX temperature level with -40 to 75° operating temperature; SSD required)

DynaStream™ supported for optimized network efficiency

ONVIF comformity for standardization and interoperability

Supports DHCP OPT66/67 for auto-configuration
* Hard disk purchased separately

* The hard disk is not included in MxNVR-MO4’s standard shipment. Users need to purchase it from hard disk vendors.

Description
Specification
Datasheet

The MxNVR-MO4 is a streaming DVR (digital video recorder), which can transmit and record H.264 or MJPEG video streams simultaneously. With a rugged design that is compliant with the essential sections of EN 50155, covering power characteristics, EMC, vibration, shock and temperature (T model, TX temperature level), the MxNVR-MO4 especially excels in rolling stock IP video surveillance applications. Moreover, the MxNVR-MO4 has passed EN 61373 standard anti-vibration testing with a 2.5 inch hard disk (purchased separately), delivering highly reliable storage performance for rolling stock applications. The MxNVR-MO4 can be triggered to record by system boot, by event, by schedule, or by external commands, such as CGI or SNMP. The embedded DynaStream™ function increases the network transmission efficiency by dynamically adjusting the video frame rate. To prevent unauthorized access, advanced 802.1X authentication is available to provide high network security. The MxNVR-MO4 also supports the ONVIF standard to easily integrate and interoperate with third party systems and software.

• Video
Video Compression	H.264 (MPEG4 part 10, AVC), MJPEG
Video Inputs	4 BNC connectors (1Vpp, 75 ohms)
Video Outputs	Via Ethernet
Video Streams	H.264/ MJPEG dual streams
Video resolution and FPS (frame per second)
Note	1. When enabling the H.264 and MJPEG video streams simultaneously, the 2 video streams support up to full D1 resolution at 30 FPS. For example, if the resolution of the H.264 video stream is 720 x 480 at 20 FPS, the MJPEG video stream will support 720 x 480 resolution at 10 FPS, or 352 x 240 at 30 FPS. 2. 4 channels of the MJPEG video streaming support up to VGA, 4CIF and Full D1 resolution at 60 FPS (including pre-event video).
Video Viewing	• DynaStream™ supported for changing the video frame rate automatically • Adjustable image size and quality • Timestamp and text overlay • Maximum of 8 simultaneous unicast connections
• Audio
Audio input	2, Line-in or MIC-in, DB9 connector
Audio format	Mono, PCM (G.711)
• Recording
Stream Types	H.264 @ 120 FPS or MJPEG @ 60 FPS
Video File Format	AVI
Record Modes	continuous recording, schedule recording, event recording
• Playback
Method	Playback with popular media players (FFDShow codec required) or with customized software (programmed by SDK)
Video Download	Remote download via FTP
• Storage
Disk Interface	1 SATA interface for 2.5-inch hard disk or SSD (solid state disk)
Disk Tray	Removable disk tray
Note	The 2.5-inch hard disk and SSD need to be purchased and installed by the user.
• Network
Protocols	TCP, UDP, HTTP, SMTP, FTP, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS, DHCP OPT66/67
Ethernet	1 10/100BaseT(X) isolated Ethernet port, M12 connector
• Serial Port
Console Port	1, RS-232 isolated RJ45 port
• GPIO
Digital Inputs	4, max. 8 mA Low: +13 V to +30 V; High: -30 V to +3 V
Relay Output	1, max. 24 VDC @ 1A
Connector	isolated DB9
• LED Indicators
STAT	System status
10/100	10Mbps or 100Mbps
Power	Power on/off
HDD	Storage disk status
FAULT	Can be configured to correspond to disconnected network
V1, V2, V3, V4	1, 2, 3, 4 video inputs activity
• Power Requirements
Input Voltage	1, 12 VDC or 24 VDC input, 5-pin isolated M12 connector
Power Consumption	Max. 11.5 W (with 1 2.5-inch HDD)
• Physical Characteristics
Housing	Metal
Dimensions	92.8 x 135 x 150.4 mm (3.93 x 5.31 x 5.35 in)
Installation	Panel mounting or DIN-rail mounting
• Security
Password	User level password protection
Filtering	By IP address
Authentication	802.1X
• Alarms
Video Motion Detection	Includes sensitivity settings
Video Loss	Video loss alarm
Scheduling	Daily repeat timing schedule
Imaging	JPEG snapshots for pre/trigger/post alarm images
Video Recording	Event recording to the hard disk (if installed)
Email/FTP Messaging	Automatic transfer of stored images via email or FTP as event-triggered actions
Custom Alarms	HTTP event servers and CGI events for setting customized alarm actions
Pre-alarm Buffer	16 MB video buffer for JPEG snapshot images
• Environmental Limits
Operating Temperature	Standard Model: 0 to 60°C (32 to 140°F) Wide Temp. Model: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Conformal Coating	Available on request
• Standards and Certifications
Safety	UL 60950-1
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	EN 61000-4-2 (ESD), Level 3; EN 61000-4-3 (RS), Level 3; EN 61000-4-4 (EFT), Level 3; EN 61000-4-5 (Surge), Level 3; EN 61000-4-6 (CS), Level 3; EN 61000-4-8; EN 61000-4-11
Rolling Stock	EN 50155*
Note	*Complies with a portion of EN 50155 specifications. Please contact Moxa or a Moxa distributor for details.
Shock	IEC 60068-2-27
Freefall	IEC 60068-2-32
Vibration	EN/IEC 61373 (with Toshiba 2.5-inch hard disk)
Note	Please check Moxa’s website for the most up-to-date certification status.
• Warranty
Warranty Period	5 years
• Minimum Viewing System Requirements
CPU	Pentium 4, 2.4 GHz
Memory	512 MB of memory
OS	Windows XP/2000 with SP4 or above, Windows Vista, Windows 7
Browser	Internet Explorer 9.x or above
Multimedia	DirectX 9.0c or above
• Software Development Kit
VPort SDK PLUS	Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers (the latest version of SDK is vailable for download from Moxa’s website).
Standard	ONVIF