PISO-DNM100-T - 1 Port Intelligent DeviceNet Master Communication Board, 5 pin Screw Terminal Connector
by ICP DAS

PISO-DNM100 can represent an economic solution of DeviceNet applications and be a DeviceNet master device on DeviceNet networks. It is a "Predefined Master-Slave Connection Set". PISO-DNM100 supports Group 2 only Server and UCMM functions to communication with slave devices. It has an independent CAN bus communication port and has the ability to cover a wide range of DeviceNet applications. 

PISO-DNM100 uses the new CAN controller Phillips SJA1000T and transceiver 82C250/251, which provide bus arbitration, error detection with auto correction and a re-transmission function. It can be installed on almost any windows-based system, for example Windows 98, Windows 2000 and Windows XP Operating Systems. It is popularly applied in the industrial automation, building automation, vehicle, marine, and embedded control network. In order to expand the DeviceNet functions of ICPDAS products, PISO-DNM100 is developed for this purpose.

• Applications:
  • Laboratory Equipment and Research
  • Industrial Machinery
  • Building Automation
  • Medical
  • Maritime
  • Restaurant Applications

Bus Interface
Type	PCI bus, 5 V, 33 MHz, 32-bit, plug and play
Board No.	By DIP switch
CAN Interface
Controller	NXP SJA1000T with 16 MHz clock Microprocessor inside with 80186 80MHz
Transceiver	NXP 82C250
Channel number	1
Connector	9-pin male D-Sub (CAN_GND, CAN_L, CAN_SHLD, CAN_H, N/A for others)
Baud Rate (bps)	125 k, 250 k, 500 k
Transmission Distance (m)	Depend on baud rate (for example, max. 1000 m at 50 kbps )
Isolation	3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminator Resistor	Jumper for 120 Ω terminator resistor
Specification	ISO-11898-2, CAN 2.0A and CAN 2.0B
Protocol	DeviceNet Volumn I ver2.0, Volumn II ver2.0
LED
Round LED	Green LED, Red LED
Software
Driver	Windows 2K/XP/7/8 (32-bit/64-bit OS)
Library	VB 6.0, VC++ 6.0, BCB 6.0, Visual Studio .NET
Power
Power Consumption	300 mA @ 5 V
Mechanism
Dimensions	138mm x 22mm x 92mm (W x L x H)
Environment
Operating Temp.	0 ~ 60 ℃
Storage Temp.	-20 ~ 70 ℃
Humidity	5 ~ 85% RH, non-condensing

PISO-DNM100-T.pdf

1,321 K