|
|
|
ICP DAS ET-7017-10 - 10 / 20 channel of Analog Input Module with High Voltage Protection
by ICP DAS
|
|
|
|
Modbus TCP based data acquisition module with 10 differential or 20 single-ended channel voltage and current Analog Input (current input) with high voltage protection and isolation, communicable over Ethernet and Modbus TCP Protocol. Supports Analog Input types: ±150mV, ±500mV, ±1V, ±5V, ±10V, ±20mA ,0~20mA, 4~20mA (jumper selectable). Supports operating temperatures between -25°C to 75°C (-13°F ~ 167°F). Has a Din rail mount.
|
|
|
The ET-7017-10 is a 16-bit, 10-channel differential or 20-channel single-ended analog input data acquisition module that provides programmable input range on all analog channels (+/-150mV, +/-500mV, +/-1V, +/-5V, +/-10V, +/-20mA, 0~20mA and 4~20mA). Each analog channel is allowed to configure an individual range and has 240Vrms high voltage protection. Jumper is selectable for voltage or current input.
The ET-7017-10 is a web-based Ethernet I/O data acquisition module. It features a built-in web server, which allows easy configuration, I/O monitoring and I/O control on a regular web browser. The web HMI function provides an easy user interface where no programming skills are needed. Users can easily create dynamic and attractive web pages for I/O monitoring and I/O control. It offers easy access for users anytime and anywhere! In addition, ET-7017-10 supports Modbus TCP protocol which allows seamless integration with SCADA software.
 
| CPU |
| CPU |
80186 CPU (80MHz) |
| SRAM |
512K Bytes |
| Flash Memory |
512K Bytes |
| EEPROM |
16K Bytes |
| Dual Watchdog |
Yes |
| Communication |
| Ethernet Port |
10 / 100 Base-TX (With Link, Activity LED Indicator)
Automatic MDI/MDI-X Crossover |
| Analog Input |
| Input Channels |
10 differential or 20 single-ended (Note1), software selectable |
| Input Type |
±150mV, ±500mV, ±1V, ±5V, ±10V
±20mA ,0~20mA, 4~20mA (jumper selectable) |
| Resolution |
16-bit (Normal Mode) / 12-bit (Fast Mode) |
| Sampling Rate |
10 samples/ second (Normal Mode) / 50 samples/ second (Fast Mode) total |
| Accuracy |
±0.1% (Normal Mode) / ±0.5% (Fast Mode) or better |
| BandWidth |
15.7Hz (Normal Mode) / 78.7Hz (Fast Mode) |
| Zero drift |
±20uV/°C |
| Span drift |
±25ppm/°C |
| Input Impedance |
Voltage: 2M Ohms(Differential), 1M Ohms(Single-ended) /Current: 125 Ohms |
| Common Mode Rejection |
86dB min. |
| Normal Mode Rejection |
100dB |
| Individual Channel Configuration |
Yes |
| Over Voltage Protection |
Differential: 240 Vrms, Single-ended: 150Vrms |
| ESD Protection |
4KV Contact for each terminal, and 8KV Air for random point |
| EFT Protection |
4KV for Power |
| 2 Way Isolation |
| Ethernet |
1500 V DC |
| AI and DO |
2500 V DC |
| Mounting |
| Din Rail Mount |
Yes |
| Wall Mount |
Yes |
| LED Display |
| L1 |
LED as Run indicator |
| L2 |
LED as Link/Act indicator |
| L3 |
LED as 10/100M indicator |
| Power Requirements |
| Protection |
Power reverse polarity protection |
| Required Supply Voltage |
+10Vdc to 30Vdc (non-regulated) |
| Power consumption |
0.11A/24V DC |
| Environment |
| Operating Temperature |
-25°C to +75°C |
| Storage Temperature |
-30°C to +80°C |
| Relative Humidity |
5 to 90% RH, non-condensing |
| Dimensions |
| Dimensions( W x H x D) |
123 mm x 72 mm x 35 mm |
|
|
|
|
