DeviceNet Interface |
DeviceNet Specification |
Volume I, Release 2.0 & Volume II, Release 2.0, Errata 5 |
DeviceNet Subscribe |
Group 2 Only Server |
Connection Supported |
1 connection for Explicit Messaging
1 connection for Polled I/O
1 connection for Bit-Strobe I/O |
Node ID |
0-63 selected by rotary switch |
Baud Rate (bps) |
125 kbps, 250 kbps, 500 kbps |
Terminator Resistor |
Switch for 120 Ω terminator resistor |
Connector |
Node Guarding protocol / Heartbeat Producer |
EDS File |
5-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+) |
EDS file |
Yes |
Analog Input |
Channels |
8 |
Input Type |
±10V, ±5V, ±1V, ±500mV, ±150mV, ±20mA,( External 125 Ohm Resistor Required) |
Resolution |
16-bit |
Sample Rate |
10 Sample/Sec (Total) |
Accurancy |
±0.1% FSR |
Zero Drift |
±10 μV/ °C |
Span Drift |
±25 ppm/ °C |
Common Mode Rejection |
86 dB |
Normal Mode Rejection |
100 dB |
Input Impedence |
>2 MΩ |
Individual Channel Configuration |
Yes |
Over Voltage Protection |
240 Vrms |
ESD Protection |
±4kV, Contact for each terminal |
Intra-module Isolation, Field-to-Logic |
3000 VDC |
LED |
Status LED |
PWR LED, NET LED, MOD LED |
Terminal Resistor LED |
1 LED as terminal resister Indicator |
Alarm LED |
8 LEDs as over Upper Limit Indicators
8 LEDs as under the Lower Limit Indicators |
Power |
Power Supply |
Unregulated +10 ~ +30 VDC |
Power Consumption |
2.0 W |
Mechanism |
Installation |
DIN-Rail |
Dimensions |
33 mm x 99 mm x 78 mm ( W x L x H ) |
Environment |
Operating Temp. |
-25°C ~ +75°C (-13°F ~ +167°F) |
Storage Temp. |
-30°C ~ +80°C (-22°F ~ +176°F) |
Humidity |
10 ~ 90% RH, non-condensing |