|
|
|
M-7017 - 8 Channel Voltage Input & Current Input, Analog Input Data Acquisition Module. Communicable over Modbus RTU and RS-485
by ICP DAS
|
|
|
|
8 Channel Voltage Input & Current Input, Analog Input Data Acquisition
Module. Communicable over Modbus RTU and RS-485. Supports operating temperatures
between -25 to 75°C. Input types include ±150mV, ±500mV , ±1V, ±5V, ±10V and
±20mA.
|
|
|
The M-7017 is an 8-channel voltage and current input module. The M-7000
series is a family of network data acquisition and control modules that support
Modbus RTU. They can be remotely controlled using a set of commands called DCON
protocol. With the Modbus RTU protocol, it can easily communicate with most
popular SCADA/HMI software and PLCs.
- Indication LED Light
- For power and communication
- Over voltage protection: 240Vrms
- Supports Modbus and DCON Protocol
- Din Rail Mount
- Analog Input Channels: 8 differential
|
Analog Input |
|
Input Channels |
8 differential |
|
Input Type |
±150mV, ±500mV , ±1V, ±5V, ±10V
±20mA (requires optional external 125 ohm resistor) |
|
Resolution |
16-bit |
|
Sampling Rate |
10 Samples/ Second |
|
Accuracy |
±0.1% |
|
BandWidth |
15.7 Hz |
|
Zero drift |
±20uV/°C |
|
Span drift |
±25ppm/°C |
|
Input Impedance |
20M Ohms |
|
Common Mode Rejection |
86dB min |
|
Normal Mode Rejection |
100dB |
|
Over voltage Protection |
±35V(P-P) |
|
Intra-module Isolation, Field to Logic |
3000 VDC |
|
Interface |
|
Interface |
RS-485 |
|
Format |
N, 8, 1 |
|
Baud Rate |
1200 ~ 115200bps |
|
LED Display |
| 1
LED |
As Power / Communication Indicator |
|
1 LED |
Power |
|
Input |
+10 to +30VDC |
|
Power Consumption |
1.3W |
|
Protocol |
|
Support Modbus and DCON Protocol |
Yes |
|
Watchdog |
Yes, Module, Communication (Programmable over DCON) firmware version
B300 and later |
|
Environment |
|
Operating temperature |
-25 to 75°C |
|
Storage temperature |
-40 to 85°C |
|
Humidity |
5 to 95% RH, non-condensing |
|
|
