|
|
tM-AD4P2C2 - 4 Channel Multifunction Analog input, 2 channel DI and 2 DO with High Voltage Proection by ICP DAS
|
|
|
4-channel Multifunction Analog Input, 2-channel Digital Input (can be used as 16-bit counter) and 2-channel Digital Output, 2 Voltage Input and 2 Current input channel Module. 4kV ESD and EFT Protection. Has operating temperature range of -25°C ~ +75°C (-13°F ~ +167°F).
|
|
|
The tM-AD4P2C2 is a multifunction module that includes 4 analog input channels, 2 digital input channels and 2 digital output channels. The module provides a programmable analog input range that includes 2 voltage input channels (±1 V, ±2.5 V, ±5 V, and ±10 V) and 2 current input channels (±20 mA, 0 ~ 20 mA and 4 ~ 20 mA). The analog inputs provide a high overvoltage protection of 120 VDC and an adjustable sampling rate. The module supports sink-type digital output with short circuit protection and the digital outputs can be used as voltage input limit alarms. The digital inputs are source-type and all digital input channels can be used as 16-bit counters. There are options for configuring power-on and safe digital output values. 4 kV ESD protection and 2500 VDC intra-module isolation are also provided. The tM-AD4P2C2 supports the DCON, Modbus RTU and Modbus ASCII protocols, which can be configured via software.
- Multifunction (4 AI, 2 DI and 2 DO)
- 2 Voltage Input Channels and 2 Current Input Channels
- Digital Input Channels can be used as 16-bit Counters
- Digital Output Channels can be used as Voltage Input Limit Alarms
- 4 kV ESD and EFT Protection
- 120 VDC Overvoltage Protection
- Adjustable Sampling Rate
- Dual Watchdog
- 2500 VDC Intra-module Isolation
- Configurable Power-on Value Settings
- Configurable Safe Value Settings
- Wide Operating Temperature Range: -25°C ~ +75°C (-13°F ~ 167°F)
Communication |
Interface |
RS-485 |
Format |
(N, 8, 1), (N, 8, 2), (O, 8, 1), (E, 8, 1) |
Baud Rate |
1200 ~ 115200 bps |
Protocol |
DCON, Modbus/RTU, Modbus/ASCII |
Dual Watchdog |
Yes, Module (2.3 seconds), Communication (Programmable) |
LED Indicators |
Power |
1 LED as Power Indicator |
Isolation |
Intra-module Isolation, Field-to-Logic |
2500 VDC |
EMS Protection |
ESD (IEC 61000-4-2) |
±4 kV Contact for Each Terminal |
±8 kV Air for Random Point |
EFT (IEC 61000-4-4) |
±4 kV for Power |
Power Requirements |
Reverse Polarity Protection |
Yes |
Powered from Terminal Block |
Yes, 10 ~ 30 VDC |
Consumption |
1 W Max. |
Mechanical |
Dimensions (W x L x H) |
52 mm x 98 mm x 27 mm |
Installation |
DIN-Rail Mounting |
Environment |
Operating Temperature |
-25°C ~ +75°C (-13°F ~ +167°F) |
Storage Temperature |
-30°C ~ +75°C (-22°F ~ +167°F) |
Humidity |
10 ~ 95% RH, Non-condensing |
I/O Specification
Analog Input |
Voltage |
Current |
Input Channels |
2 Single-ended |
2 Single-ended |
Type |
±1 V, ±2.5 V, ±5 V, ±10 V |
±20 mA, 0 ~ 20 mA, 4 ~ 20 mA |
Resolution |
Normal Mode |
14-bit |
Fast Mode |
12-bit |
Sampling Rate |
Normal Mode |
10 Hz total |
Fast Mode |
200 Hz total |
Accuracy |
Normal Mode |
+/-0.1% |
Fast Mode |
+/-0.5% |
Zero Drift |
+/- 20 μV/°C |
Span Drift |
+/- 25 ppm/°C |
Input Impedance |
10 Ω |
136 Ω |
Overvoltage Protection |
120 VDC |
- |
Overcurrent Protection |
- |
Yes, 50 mA @ 110 VDC |
|
|