|
|
|
ICP DAS M-7018Z - 10 Channel Voltage & Current Thermocouple Input Data Acquisition Module, High Over Voltage Protection & Cable
by ICP DAS
|
|
|
|
10 Channel Analog Input Data Acquisition Module, supports Current Input,
Voltage Input and Thermocouple Input. Communicable over Modbus RTU and RS-485
with High Over Voltage Protection and cable. Supports operating temperatures
between -25 to 75°C (-13F ~ 167F). Includes DB-1820 Daugther Board.
|
|
|
The M-7018Z is a 10-channel voltage and current thermocouple input data
acquisition module. It is communicable over Modbus RTU and RS-485 with High Over
Voltage Protection. Supports operating temperatures between -25 to 75°C (-13F ~
167F). M-7018Z comes with a DB-1820 Daugther Board that supports Modbus RTU.
They can be remotely controlled using a set of commands called DCON protocol.
With the Modbus RTU protocol, it can easily communicate with most popular SCADA
software and PLCs.
- Indication LED Light
- For power and communication
- Over voltage protection for M-7018R: 240Vrms
- Supports Modbus RTU and DCON Protocol
- 8 differential Analog Input Channels
- Analog Input Types: mV, V , mA
- Thermocouple: Type J, K, T, E, R, S, B, N, C
- Din Rail Mount
|
Analog Input |
|
Input Channels |
10 Differential |
|
Input Type |
+/- 15mV, +/- 50mV, +/- 100mV, +/- 500mV, +/- 1V, +/- 2.5V
+/-20mA, 0~20mA, 4~20mA (Requires Optional External 125 Ohm Resistor)
Thermocouple (J, K, T, E, R, S, B, N, C, L, M, LDIN43710) |
|
Resolution |
16-bit |
|
Sampling Rate |
10 Samples/Sec (Total) |
|
Accuracy |
+/- 0.1 % |
|
-3dB BandWidth |
15.7 Hz |
|
Zero Drift |
+/- 0.5 μV/°C |
|
Span Drift |
+/- 25 ppm/°C |
|
Common Mode Rejection |
150 dB |
|
Normal Mode Rejection |
100 dB |
|
Input Impedance |
>500k Ohms |
|
Over voltage Protection |
240 Vrms |
|
Open Thermocouple Detection |
Yes |
|
Individual Channel Configuration |
Yes |
|
Intra-module Isolation, Field to Logic |
3000 VDC |
|
Interface |
|
Interface |
RS-485 |
|
Format |
N, 8, 1 |
|
Baud Rate |
1200 ~ 115200 bps |
|
DB-1820 (3.81mm pitch) |
|
Wire Strip Length |
4 ~ 5 mm |
|
Wire Range |
16 ~ 24 AWG |
|
DN-1822 (5.08mm ptich) |
|
Wire Strip Length |
4 ~ 5 mm |
|
Wire Range |
14 ~ 24 AWG |
|
LED Display |
|
1 LED as Power/Communication Indicator |
|
Power |
|
Input |
+10 ~ +30 VDC |
|
Power Consumption |
1.0W |
|
Protocol |
|
Support Modbus and DCON Protocol |
Yes |
|
Environment |
|
Operating Temperature |
-25 ~ 75 °C |
|
Storage Temperature |
-40 ~ 85 °C |
|
Humidity |
5 ~ 95% RH, Non-condensing |
Thermocouple Type
|
Type |
Range°C |
|
J |
-210 ~ +760 |
|
K |
-270 ~ +1372 |
|
T |
-270 ~ +400 |
|
E |
-270 ~ +1000 |
|
R |
0 ~ +1768 |
|
S |
0 ~ +1768 |
|
B |
0 ~ +1820 |
|
N |
-270 ~ 1300 |
|
C |
0 ~ 2320 |
|
L |
-200 ~ +800 |
|
M |
-200 ~ +100 |
|
L (DIN43710) |
-200 ~ +900 |
|
|
|
|
