|
|
|
ICP DAS M-7041D - 14 Channel Isolated Digital Input Counter Data Acquisition Module, communicable over Modbus RTU and RS-485 wit
by ICP DAS
|
|
|
|
14 Channel Isolated Digital Input Counter Data Acquisition Module,
communicable over Modbus RTU and RS-485 with Display, supports operating
temperatures from -25°C ~ +75°C (-13°F ~ +167°F)
|
|
|
The M-7041D device is a network data acquisition and control modules that
support Modbus RTU. They can be remotely controlled using a set of commands
called DCON protocol. With the Modbus RTU protocol, it can easily communicate
with most popular SCADA/ HMI software and PLCs.
- Digital Input Channels: 14
- Display LED:
- 4 1/2 digit LED display ( MI-7016D)
- Digital input status
- Isolated channel with common power
- D/I can be used as counter
- Communicatble via Modbus protocol
- Communication Interface: RS-485
- Din Rail Mount
|
Communication |
|
Interface |
RS-485 |
|
Format |
N, 8, 1 |
|
Baud Rate |
1200 ~ 115200 bps |
|
Logic level 1: +3.5 to 30V |
|
Protocol |
DCON |
|
Dual Watchdog |
Yes, Module (1.6 Seconds), Communication (Programmable) |
|
LED Indicators/Display |
|
System LED Indicator |
Yes, 1 LED as Power/Communication Indicator |
|
I/O LED Indicators |
- |
|
7-Segment LED Display |
Yes, 14 LEDs as Digital Input Indicators |
|
Isolation |
|
Intra-module Isolation, Field-to-Logic |
3750 VDC |
|
EMS Protection |
|
ESD (IEC 61000-4-2) |
±4 kV Contact for each Terminal |
|
±8 kV Air for Random Point |
|
EFT (IEC 61000-4-4) |
±2 kV for Power Line |
|
Surge (IEC 61000-4-5) |
- |
|
Power |
|
Reverse Polarity Protection |
Yes |
|
Input Range |
10 ~ 30 VDC |
|
Consumption |
0.2 W |
|
Mechanical |
|
Dimensions (W x L x H) |
72 mm x 123 mm x 35 mm |
|
Installation |
DIN-Rail or Wall Mounting |
|
Environment |
|
Operating Temperature |
-25°C ~ +75°C (-13°F ~ +167°F) |
|
Storage Temperature |
-40°C ~ +85°C (-40°F ~ +185°F) |
|
Humidity |
10 ~ 95% RH, Non-condensing |
I/O Specifications
|
Digital Input/Counter |
|
Channels |
14 |
|
Type |
Dry Contact |
- |
|
Wet Dry |
Sink/Source |
|
Wet Contact |
On Voltage Level |
+4 ~ 30 VDC |
|
Off Voltage Level |
+1 VDC Max. |
|
Dry Contact |
On Voltage Level |
- |
|
Off Voltage Level |
- |
|
Effective Distance for Dry Contact |
- |
|
Counters |
Max. Count |
65535 (16-bit) |
|
Max. Input |
100 hz |
|
Min. Pulse Width |
5 ms |
|
Input Impedence |
3 KΩ |
|
Chanell-to-Channel Isolation |
- |
|
Overvoltage Protection |
±35 VDC |
|
|
|
|
