|
|
M-7060PD - 4-channel Isolated Digital Input (Counter) Voltage Input and 4-channel Relay Output Module with DCON and Modbus RTU P by ICP DAS
|
|
|
4-channel Isolated Digital Input (Counter) Voltage Input and 4-channel Relay
Output Module with DCON and Modbus RTU Protocol and LED Display, supports
operating temperatures from -25 ~ +75°C
|
|
|
The M-7060P offers 4-channel digital inputs, 2-channel Form A power relay
outputs and 2-channel Form C power relay outputs at the same time. Moreover, you
can choose either sink type or source type of digital input via wire
connections. All Input channels are able to be used as 16-bit counters. M-7060P
also has 8 LED indicators for power relay outputs and digital inputs status
monitoring. And both support the Modbus RTU and DCON protocols which can be
confi gured via software. There are options for configuring power-on and safe
digital output values. 4 kV ESD protection and 3750 VDC intra-module isolation
are also provided to enrich the noise protection ability for industrial
environment. The M-7060P Specifi cations difference, M-7060P It support power
relay Form A (16 A @ 250VAC/10 A @ 30 VDC) and Form C (10 A NO/6 A NC @ 250 VAC
& 10 A NO/6 A NC @ 30 VDC)
- 4 Digital Inputs and 4 Relay Outputs
- Both Form A and Form C Power Relay
- Source and Sink type for DI
- DI Channels Can Be Used As 16-bit Counters
- Configurable Power-on Value Settings
- Configurable Safe Value Settings
- Dual Watchdog
- Wide Operating Temperature Range: -25 ~ +75 °C
Communication |
Interface |
RS-485 Modbus RTU, DCON |
Format |
(N, 8, 1), (N, 8, 2), (E, 8, 1), (O, 8, 1) |
Baud Rate |
1200 ~ 115200 bps |
Protocol |
Modbus RTU, DCON |
Dual Watchdog |
Yes, Module (1.6 Seconds), Communication (Programmable over Modbus RTU) |
LED Indicators/Display |
System LED Indicator |
Yes, 1 LED as Power/Communication Indicator |
I/O LED Indicators |
- |
Yes, 8 LEDs as Digital Input/Relay Output Indicators |
7-Segment LED Display |
- |
Isolation |
Intra-Module Isolation, Field-to-Logic |
3750 VDC |
EMS Protection |
ESD (IEC 61000-4-2) |
±4 kV Contact for each Terminal |
±8 kV Air for Random Point |
EFT (IEC 61000-4-4) |
±4 kV for Power Line |
Surge (IEC 61000-4-5) |
±3 kV for Power Line |
Protocol |
Support Modbus and DCON Protocol |
Yes |
Power |
Reverse Polarity Protection |
Yes |
Input Range |
10 ~ 30 VDC |
Consumption |
1.4 W |
Mechanical |
Dimensions ( W x L x H) |
72 mm x 123 mm x 35 mm |
Installation |
DIN-Rail or Wall Mounting |
Environment |
Operating Temperature |
-25 ~ +75°C |
Storage Temperature |
-40 ~ +85°C |
Humidity |
10 ~ 95% RH, Non-condensing |
I/O Specifications
Relay Output |
Channel |
4 (Form A x 2, Form C x 2) |
Relay Type |
Power Relay |
Form A Relay |
Contact Rating |
16 A 2 250 VAC
10 A @ 30 VDC |
Min. Contact Load |
100 mA @ 6 V |
Contact Material |
Silver Tin Alloy |
Operate Time |
10 ms |
Release Time |
5 ms |
Mechanical Endurance |
1 x 10^7 ops. |
Electrical Endurance |
1 x 10^5 ops. |
Form C Relay |
Contact Rating |
NO:10 A @ 250 VAC
NC:6 A @ 250 VAC |
Min. Contact Load |
100 mA @ 6V |
Contact Material |
Silver Tin Alloy |
Operate Material |
10 ms |
Release Time |
5 ms |
Mechanical Endurance |
1 x 10^7 ops. |
Eletrical Endurance |
1 x 10^5 ops. |
Surge Strength |
2500 VDC |
Power-on Value |
Yes |
Safe Value |
Yes |
Digital Input/Counter |
Channel |
4 |
Type |
Dry Contact |
0 |
Wet Contact |
Sink/source |
On Voltage Level |
+4VDC Max. |
Off Voltage Level |
+10 ~ 50 VDC |
Counters |
Max Count |
65535 (16-bit) |
Max. Input Frequency |
100 Mhz |
Min. Pulse Width |
5 ms |
Input Impedance |
10 kΩ |
Overvoltage Protection |
+/-70 VDC |
|
|