Advantech EIR-EXTEND-C - *Discontinuted* - ETHERNET COAXIAL EXTENDER, 10/100, DIN RAIL
by Advantech

The EIR-EXTEND-C is a point-to-point Ethernet Extender designed to operate in harsh environments making use of existing coaxial cable. Ethernet connections can be made up 8,530 feet using existing coaxial cable. The Ethernet Extender fully complies with IEEE 802.3 10BaseT and IEEE 802.3u 100BaseTX standards. The EIR-EXTEND-C functions at temperatures ranging from -40°C to 75°C (-40°F to 167°F) and is tested for functional operation @ -40°C to 85°C (-40°F to 185°F). The perfect solution for legacy surveillance infrastructure upgrades moving from analog to IP-based, as no new cable is needed - saving time, money and labor cost. Installation is easy with a single switch setting; one end is set for local and the other remote. The EIR-EXTEND-C is used in pairs, one at each end of your existing coaxial cable.

EIR-EXTEND

• Extender Interface: RJ-11 or Terminal Block
• Ethernet Interface: one 10/100BaseTX port with RJ-45 connector
• Power: Redundant 12 – 30 VDC Terminal Block, 12 VDC – Power Jack (Power Supply Optional)
• Operating Temp: -40º to 75º C (Tested to 85º C)
• Enclosure: DIN Mount IP30 Aluminum

EIR-EXTEND-4

• UL508 and NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
• IEC61000-6-2 EMC for Heavy Industrial environment
• Extender Interface: RJ-11 or Terminal Block
• Ethernet Interface: four 10/100BaseTX port with RJ-45 connector
• Power: Redundant 24 – 48 VDC Terminal Block, 48 VDC – Power Jack (Power Supply Optional)
• Operating Temp: -40º to 75º C (Tested to 85º C)
• Enclosure: DIN Mount IP30 Aluminum

Distances Up To
Speed	EIR-EXTEND
1 Mbps	6200 ft. (1900 m)
10 Mbps	4500 ft. (1400 m)
20 Mbps	3200 ft. (1000 m)
30 Mbps	2550 ft. (700 m)
50 Mbps	980 ft. (300 m)

 

EIR-EXTEND-C.pdf

367 K