• Technology |
Standards |
IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X), 100BaseFX |
• Interface |
RJ45 Ports |
10/100BaseT(X) |
Fiber Ports |
100BaseFX (SC/ST connectors) |
LED Indicators |
PWR, Fiber Link, 10/100M (TP port) |
DIP Switches |
|
• Optical Fiber |
|
100BaseFX |
Multi-Mode |
Single-Mode |
Fiber Cable Type |
OM1 |
50/125 um |
G.652 |
800 MHz * km |
Typical Distance |
4 km |
5 km |
40 km |
Wave-length |
Typical (nm) |
1300 |
1310 |
TX Range (nm) |
1260 to 1360 |
1280 to 1340 |
RX Range (nm) |
1100 to 1600 |
1100 to 1600 |
Optical Power |
TX Range (dBm) |
-10 to -20 |
0 to -5 |
RX Range (dB) |
-3 to -20 |
-3 to -34 |
Link Budget (dB) |
12 |
29 |
Dispersion Penalty (dB) |
3 |
1 |
Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power.
Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB) |
|
• Physical Characteristics |
Dimensions |
86.8 x 124.3 x 21 mm (3.42 x 4.89 x 0.83 in) |
Weight |
Product only:
CSM-200-1213: 115 g (0.25 lb)
CSM-200-1214/1218: 125 g (0.28 lb)
Packaged:
CSM-200-1213: 170 g (0.37 lb)
CSM-200-1214/1218: 180 g (0.40 lb) |
• Environmental Limits |
Operating Temperature |
0 to 55°C (32 to 131°F) |
Storage Temperature |
-20 to 75°C (-4 to 167°F) |
Ambient Relative Humidity |
5 to 95% (non-condensing) |
• Power Requirements |
Input Voltage |
12 VDC |
Input Current |
180 mA @ 12 VDC max. |
• Standards and Certifications |
Safety |
UL 60950-1 |
EMC |
EN 55032/24 |
EMI |
CISPR 32, FCC Part 15B Class A |
EMS |
EN 61000-4-2 (ESD): Contact: 4 kV; Air: 8 kV
EN 61000-4-3 (RS): 80 MHz to 1 GHz: 3 V/m
EN 61000-4-4 (EFT): Power: 1 kV; Signal: 0.5 kV
EN 61000-4-5 (Surge): Power: 1 kV; Signal: 0.5 kV
EN 61000-4-6 (CS): 150 kHz to 80 MHz: 3 V/m
EN 61000-4-8 (PFMF)
EN |
Freefall |
IEC 60068-2-32 |
• MTBF (mean time between failures) |
Time |
1,454,560 hrs |
Standard |
Telcordia (Bellcore), GB |