COVID-19 Response: a note to our customers. 
We're here to help.Learn More>

Login / Register Contact Us
UPS-DC1248-9 - UPS Pro, 30W 100VA DieCast Enclosure, 12V 9Ah Batt, 48V POE, Solar Ready. 24hr backup @ 3.5W by Tycon Systems

UPS-DC1248-9 - UPS Pro, 30W 100VA DieCast Enclosure, 12V 9Ah Batt, 48V POE, Solar Ready. 24hr backup @ 3.5W
by Tycon Systems

Write a review Write a review
  • Weatherproof, UV resistant , outdoor enclosures
  • Powered over CAT5 cable using POE and/or Solar
  • Generous interior space for customer electronics
  • Wall or Pole Mounting
  • Isolates Customer Equipment from Power Line Surges
  • High Quality AGM VR Sealed Lead Acid Batteries
  • Advanced b attery charge controller protects against overcharge and over discharge


Mfg SKU # : UPS-DC1248-9
List Price : $199.95
Our Price : $196.00
Stock :264
Quantity :

The UPSPro™ series outdoor enclosures are designed for applications that require a backup power source in order to maintain uninterrupted service to customers. The enclosure is powered over a CAT5 network cable using Power Over Ethernet (PoE) with a high power PoE Supply/Inserter (included). Inside, the system has a RJ45 connector as DATA/PoE input and an RJ45 connector as a DATA/PoE output which gets connected to the customers POE device. There is also an unregulated 12VDC output on a wire terminal connection. The 12VDC output is capable of 18W and the PoE output is capable of 30W for a total of 48W. The integrated controllers are Solar Ready and can be used with an external 12VDC solar panel up to 140W in addition to grid power supplied via PoE.

Customer electronics operate from battery power so they are isolated from damaging power line surges. The batteries are continuously charged via the PoE input and/or solar power. The solar power takes precedence over grid power when available.

Features include a battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid AGM batteries. Enclosures have multiple ports for CAT5 cable, antenna cables/connectors or other cabling. They are vented to prevent residual buildup of hydrogen gas.

There is a generous amount of space reserved inside the enclosures for customer electronics such as controllers, wireless AP or CPE cards, sensors, etc.

A typical 250mW wireless access point with average power consumption of 3.5W will run 26 hours on a 9AH battery at room temperature or 17 hours at -20 deg C.

POE Output Voltages Available (DC) 48V
Available Capacities (Amp Hours) 9Ah
Total Output Power 30W
Maximum POE Input Voltage 57V
Battery Voltage (DC) 12V
Battery Type Valve Regulated Sealed Lead Acid / Absorbent Glass Mat (AGM)
Battery Life 5 Years
Controller Type Dual Input Solar/POE, PWM, 12V 8 A Max Solar Panel Size 13 5W
Overcharge Protection 14.4V
Over -discharge protection 11.0V
Over - discharge recovery voltage 12.0V
Controller Self Consumption <0.5W
Charging PO E Power Supply 120/220VAC In ; 24VDC 60W Out
Enclosure Type Die Cast Aluminum
Enclosure External Size 11 x 8.5 x 3.5” (279 x 216 x 89mm)
Enclosure Internal Size 10 x 7.75 x 3” (254 x 197 x 76mm)
Space available for Customer Electronics 7.75 x 5 x 1.25” (197 x 127 x 32mm)
Operating Temperature - 30°C to +60°C ( - 22°F to 140°F)
System Weight (without batteries) 4l b (1.8kg)
Battery Weight (each) 5.5lb (2.5kg)

Copyright © 2021 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.