Tycon Systems RPPL12-36-30 - RemotePro 8W Continuous Remote Power System, 30W Solar Panel & Mount, Polycarbonate Enclosure, 12V
by TYCON SYSTEMS

The sealed and weatherproof Polycarbonate enclosures hold up to four 12V 9AH batteries. The enclosures are hinged and gasket sealed. They can accept a padlock of tamper seal. The enclosures can be mounted to a wall or pole with the included mounting bracket system. The high quality solar panels have a 25year power output guarantee. The 30W solar panels can be mounted to a 51mm to 101mm (2" to 4") diameter pole or alternately to a wall with the included bracket kit. Features include an advanced battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid batteries. Most of the RPPL systems include a controller with built in POE inserter and DCDC converter to supply 24V or 48V POE from the 12V or 24V battery system. Enclosures have multiple ports for CAT5/6 cable, antenna cables/connectors or other cabling. RPPL12-36-30 are vented to prevent residual buildup of hydrogen gas. Batteries are an Advance Glass Matt (AGM) type which have good all temperature performance.

	RPPL12-36-30
Rated Power Generation	8W
Reserve Time @ Rated Power	27hrs
POE Output Voltage (DC)	No POE Out
Secondary Volts Out (DC)	12V 20A
Battery Capacity (Amp Hrs)	36Ah
Battery Voltage (DC)	12V
Battery Type	Valve Regulated Sealed Lead Acid / Absorbent Glass Mat (AGM)
Battery Life	5 Years
Controller Type	PWM
Overcharge Protection	14.4V
Over-discharge protection	11.0V
Over-discharge recovery volts	12.5V
Controller Self Consumption	< 0.5W
Enclosure Type	Polycarbonate
Enclosure External Size	17.5 x 12.5 x 6” (445x318x152mm)
Enclosure Internal Size	14 x 10 x 5” (356x254x127mm)
Solar Panel Dims	26” X 16” (654 x 401mm)
Operating Temperature	-30°C to +60°C (-22°F to 140°F)
System Weight (no batteries)	22lb (10kg)
Battery Weight	22lb (10kg)
Wind Speed Rating	110MPH (49m/s)

RPPL12-36-30.pdf

960 K