|
|
|
ICP DAS I-7567 - USB To HART Protocol Converter with Software Setup Utility. Compatible with USB 1.1 and 2.0 standard. Microsoft
by ICP DAS
|
|
|
|
I-7567_SUMMARY.html
- Support HART Short/Long frame
- Support HART Burst mode
- Support point-to-point or multi-drop HART mode
- Support connecting up to 15 HART slave devices
- Allow two HART masters
- Provide utility tool for module configuration and HART communication
- No external power supply (powered by USB)
- Support firmware update via USB
- Provide PWR / Tx / Rx indication LED
- 4KV ESD Protection
- Selectable 250O load resistor
|
|
|
I-7567_DESCRIPTION.html
The I-7567 is a USB to HART converter designed for the master device of HART protocol. It allows users to access the HART slave by using virtual COM-port. It can be used with HART slave devices like transmitters, actuators, current output devices, etc. It also comes with free utility tool for configuration.
I-7567.html
| USB Interface
|
| USB Port
|
USB Type B
|
| Compatibility
|
USB 1.1 and 2.0 standard
|
| Virtual COM Parameter
|
1200 bps, O(odd parity), 8(data bit), 1(stop bit)
|
| HART Interface
|
| Channel
|
1
|
| Connector
|
2-pin screwed terminal block
|
| Terminator Resistor
|
Selectable 250 O terminal resistor
|
| 4KV ESD Protection
|
Yes, Contact for each terminal.
|
| Isolation Voltage
|
3000 VDC
|
| LED
|
| LED Display
|
PWR : Power Indicator
Tx : Received Data from USB
Indicator
Rx : Received Data from HART Indicator
|
| Power
|
| Power supply
|
By USB Interface
|
| Power Consumption
|
Maximum : 1.5W
|
| Software
|
| Driver
|
Windows 2000 / XP / Vista / 7 (32/64 bit)
|
| Mechanism
|
| Installation
|
DIN-Rail or Wall Mounting
|
| Dimensions
|
108 mm x 72 mm x 35 mm (H x W x D)
|
| Environment
|
| Operating Temp.
|
-25 ? ~ +75 ? (-13 to 167?)
|
| Storage Temp.
|
-30 ? ~ +75 ? (-22 to 167?)
|
| Humidity
|
5% ~ 95%, non-condensing
|
|
|
|
|
