Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
IES-2042PA  - Slim Type 4x 10/100TX (RJ-45) + 2 x 100FX (SFP)  with DIP switch by ORing Industrial Networking

IES-2042PA - Slim Type 4x 10/100TX (RJ-45) + 2 x 100FX (SFP) with DIP switch
by ORing Industrial Networking

Write a review Write a review
Mfg SKU # : IES-2042PA
Our Price : $319.00
Stock : 1
Quantity :
IES-2042PA is a Lite-Managed Redundant Ring Ethernet switch. With very compact size of housing, you can install IES-2042PA easily. In addition, it also supports of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-Chain and STP/RSTP (IEEE802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IES-2042PA provides the setting ability of Web-GUI and Windows Utility, also support the simple DIP-Switch setting function which offers great flexibility to set up the Ring. With it's rigid IP-30 housing design, it can operate under harsh environment. The feature of wide operating temperature range from -40 to 70°C can satisfy most requirement of operation.
Physical Ports  
100Base-FX SFP Ports 2
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow control
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 2048 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switch Properties Switching bandwidth : 1.2 Gbps 
VLAN : Port Based
Security Features Enable/disable ports
VLAN to segregate and secure network traffic
Software Features STP/RSTP/MSTP (IEEE 802.1D/w/s) 
Redundant Ring (O-Ring) with recovery time less than 20ms over 250 
DHCP Client 
Port base VLAN 
LLDP (Link Layer Discovery Protocol)
Port configuration, status, statistics, monitoring, security
SNMP v1/v2c/v3 and private MIB support
Network Redundancy O-Ring 
Fast Recovery Mode
DIP-Switch Setting  
P.F. When power fault enable relay warning system (On : Enable, Off : Disable function)
R.E. Enable/Disable O-Ring function (On : Enable, Off : Disable)
R.M. Enable/Disable Ring Master Mode (On : Enable, Off : Disable)
R.S. O-Ring redundant port select ( On : ring port set to port-5 and port-6, Off : ring port set to port-1 and port-2 )
LED Indicators  
Power Indicator Green : Power LED x 2
R.M. Indicator Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator Green : Indicates that the system is operating in O-Ring mode
Fault Indicator Amber : Indicates unexpected event occurred
100Base-FX SFP Port Indicator Green for port Link/Act
10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act. Amber for Link
Fault Contact  
Relay Relay output to carry capacity of 1A at 24VDC
Redundant Input Power Dual 12~48 VDC power input at 6-pin terminal block
Power Consumption (Typ.) 7 Watts
Overload Current Protection Present
Reverse Polarity Protection Present  on terminal block
Physical Characteristics  
Enclosure IP-30
Dimensions (W x D x H) 26.1 mm (W) x 95 mm(D) x 144.3 mm(H)
Weight (g) 395 g
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals  
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1


Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.