| Models | NS-200AFC-T | NS-200AFT-T | NS-200AFCS-T | NS-200AFCS-60T |
| Technology |
| Standards | IEEE 802.3, 802.3u, 802.3x |
| Processing Type | Store & forward, wire speed switching |
| MAC Addresses | 1024 |
| Memory Bandwidth | 1.4 Gbps |
| Frame Buffer Memory | 256 Kbit |
| Flow Control | IEEE 802.3x flow control, back pressure flow control |
| Interface |
| RJ-45 Ports | 10/100 Base-TX auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
| Fiber Port | 100 Base-FX |
| LED Indicators | 10/100M, Link/Act, Full duplex/Half duplex (Fiber Port) |
| Ethernet Isolation | 1500 Vrms 1 minute |
| Multi Mode | Multi mode fiber cables | 50/125, 62.5/125 or 100/140 µm | |
| Distance | 2 km, (62.5/125 µm recommended) for full duplex | |
| Wavelength | 1300 or 1310nm | |
| Min. TX Output | - 20 dBm | |
| Max. TX Output | -14 dBm | |
| Max. RX Sensitiv | -32 dBm | |
| Max. RX Overload | -8 dBm | |
| Budget | 12 dBm | |
| Single Mode | Single-mode fiber cables | | 8.3/125, 8.7/125, 9/125 or 10/125µm |
| Distance | | 30 Km | 60 Km |
| Wavelength | | 1300 or 1310nm |
| Min. TX Output | | - 15 dBm | -5 dBm |
| Max. TX Output | | -8 dBm | 0 dBm |
| Max. RX Sensitivity | | -34 dBm | -35 dBm |
| Max. RX Overload | | -5 dBm |
| Budget | | 19 dBm | 30 dBm |
| Ethernet Transmission Distance | Ethernet | 2-pair UTP/STP Cat.3, 4, 5, EIA/TIA-568 100 O |
| Fast Ethernet | 2-pair UTP/STP Cat. 5, EIA/TIA-568 100 O |
| Power |
| Input Voltage Range | +12 VDC~ +48 VDC(Non-isolation) |
| Power Consumption | 0.12 A @ 24 VDC |
| LED Indicator | Yes |
| Protection | Power reverse polarity protection |
| Frame Ground for EMS Protection | Yes |
| Mechanical |
| Casing | Plastic (Flammability UL 94V-0) |
| Dimensions (W x L x H) | 33 mm x 85 mm x 107 mm |
| Installation | DIN-Rail |
| Environment |
| Operating Temperature | -30 C ~ +75 C |
| Storage Temperature | -30 C ~ +85 C |
| Ambient Relative Humidity | 10% ~ 90% RH, non-condensing |
