• Technology |
Standards |
IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3x for Flow Control IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1Q for VLAN Tagging |
• Software Features |
Management |
IPv4/IPv6, SNMP v1/v2c/v3, LLDP, Port Mirror, DHCP Client, Syslog, SNMP Inform, Flow Control, Back Pressure Flow Control |
Filter |
IEEE 802.1Q VLAN |
Redundancy Protocols |
STP, RSTP |
Security |
Broadcast Storm Protection, Port Lock, SNMPv3, HTTPS |
Time Management |
SNTP/NTP Server/Client |
Industrial Protocols |
EtherNet/IP, PROFINET IO, and Modbus/TCP |
MIB |
RFC1213 MIB, Ether-Like MIB, IF MIB, LLDP-MIB, BRIDGE MIB, Q-BRIDGE MIB |
• Switch Properties |
Max. Number of VLANs |
8 |
VLAN ID Range |
VID 1 to 4094 |
MAC Table Size |
8 K |
Packet Buffer Size |
3 Mbit |
• Interface |
RJ45 Ports |
10/100BaseT(X) auto negotiation speed |
Storage Port |
USB storage (Type A connector for ABC-02-USB) |
Alarm Contact |
1 relay output with current carrying capacity of 1 A @ 24 VDC |
Digital Inputs |
1 input with the same ground, but electrically isolated from the electronics.• +13 to +30 V for state “1” • -30 to +3 V for state “0” • Max. input current: 8 mA |
Button |
Reset button |
• Power Requirements |
Input Voltage |
12/24/48/-48 VDC, redundant dual inputs |
Operating Voltage |
9.6 to 60 VDC |
Input Current |
0.55 A @ 24 V |
Overload Current Protection |
Supported |
Connection |
2 removable 4-contact terminal blocks |
Reverse Polarity Protection |
Supported |
• Physical Characteristics |
Housing |
Metal |
IP Rating |
IP40 |
Dimensions |
20 x 135 x 111 mm (0.79 x 5.32 x 4.37 in) |
Weight |
438 g (0.97 lb) |
Installation |
DIN-rail mounting |
• Environmental Limits |
Operating Temperature |
Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
Storage Temperature |
-40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity |
5 to 95% (non-condensing) |
• Standards and Certifications |
Safety |
UL 61010-2-201, EN 60950-1 (Preliminary) |
EMC |
EN 61000-6-2/6-4 |
EMI |
CISPR 22, FCC Part 15B Class A |
EMS |
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: Signal: 10 V IEC 61000-4-8 PFMF: 300A/m, 60 s |
Shock |
IEC 60068-2-27 |
Freefall |
IEC 60068-2-32 |
Vibration |
IEC 60068-2-6 |
Note |
Please check Moxa’s website for the most up-to-date certification status. |
• MTBF (mean time between failures) |
Time |
1,391,620 hours |
Standard |
Telcordia (Bellcore), GB |