NS-206FC - 4 Port 10/100 Base RJ 45 with 2 Port Fiber Optic, SC Connector, Multi-Mode, Plastic Case
by ICP DAS

The NS-206FC (SC Connector; Multi-mode) is an unmanaged 4-Port Industrial 10/100 Base-T(X) with Dual 100 Base-FX Switch that secures data transmission by using fiber optic transmission to provide immunity from EMI/RFI interference. It uses Ethernet for transmitting a signal up to 2Km(6,600 ft), and is the perfect solution for applications where transmission must be protectedfrom electrical exposure, surges, lightning or chemical corrosion. The NS-206FC operates at either half or full duplex mode. In full duplex mode, range is 2Km with 62.5/ 125μm fiber cables; in half duplex mode the range is 412m with 62.5/ 125μm fiber cables. The NS-206FC can extend your LAN in a daisy chain configuration. Please refer to Hardware. The Ethernet supports 10/ 100M auto-negotiation feature and auto MDI /MDIX function.

• Automatic MDI / MDI-X crossover for plug-and-play
• Each port supports both 10/100 Mbps speed auto negotiation
• Store-and-forward architecture
• Full duplex IEEE 802.3x and half duplex backpressure flow control
• 1.6 Gbps high performance memory bandwidth
• Frame buffer memory: 256 Kbit
• Integrated look-up engine with dedicated 1 K unicast MAC addresses.
• Supports +10 ~ +30Vdc voltage
• Supports operating temperatures from 0°C ~ +70°C
• DIN rail mount for industrial usage

• Compatibility : IEEE 802.3, IEEE802.3u, IEEE802.3x
• Interface : 10/100 Base-T(X) and 100 Base-FX(SC Connector; Multi-mode)
• Ethernet Ports: 10/100 Mbps x 4
• Fiber Optic Ports: 100 Mbps x 2
• Provides LEDs for network and power monitoring
• ESD Protection:
  • 8 KV Contact Discharge
  • 15KV Air-Gap Discharge
• Fiber Optic Transmission distance:
  • Multi mode fiber cables : 50/125, 62.5/125 or 100/140 μm
  • Distance : 2 km, 1300 nm (62.5/125 μm)
  • Min. TX Output : -20 dBm
  • Max. TX Output : -14 dBm
  • Sensitivity : -34 to -31 dBm 
    
• Ethernet Cables:
  • 10 Base-T (Cat.3, 4,5 UTP cable; 100m Max.)
  • 100 Base-TX (Cat.5 UTP cable; 100m Max.)
• General Environment :
  • Operating temperature : -10°C ~ +70°C
  • Storage Temperature : -20°C ~ +85°C
  • Relative Humidity : 10% to 90% non-condensing
• Dimensions : 64mm x 110mm x 106mm (W x H x D)
• Power requirements : +10 to 30Vdc (Removable Terminal Block)
• Power consumption : 0.24A@24Vdc (±5%, arrowed)