ORing IBS-102FX-SS-LC - Industrial 2-port optical bypass switch for fiber optical network with 4xLC duplex Connector - Single mo
by ORing Industrial Networking

IBS-102FX-SS-LC

Support 100M/1G/10G optical bypass function of 2 port duplex or 4 port simplex fiber connection
Single-mode optical fiber
Low insertions loss
Throughput not affected and no extra delay
Bypass switching time < 10ms
Dual wide-range power inputs: 12~48VD
Relay output for power failure warning
Rigid IP-30 housing design
DIN-Rail/Wall-mount installation

Description
Specification
Datasheet

IBS-102FX series are the external Bypass switches for 100M/1G/10G fiber optical networks. These fiber optical bypass switches protect the network from failures and subsequent maintenance by ensuring network integrity during power loss. Each of these fiber optical bypass switches includes Network ports and Monitor ports. The Network ports are used for connection to main-network connections and provide protection mechanism, and the Monitor ports are used for down-link local networking device. When the power is on, the operation mode of the Bypass switch is set to Normal, and the local networking device is connected with main-network. When power failure occurs, the Bypass switch is swiftly set to bypass mode to isolate the main-network from the local networking device.

Physical Ports
LC connector	4 Duplex Single-mode LC connector
Fiber Ethernet
Optical Fiber	Single-mode: 9/125μm
Operating Wavelength	1260 ~ 1570 nm
Insert loss	typical1.2 dB , Maximun 1.6 dB
Switch time	< 10ms
DIP Switch Settings
DIP Swicth No.1	Power-1 failed warning detection – (On) relay enable (Off) relay disable
DIP Swicth No.2	Power-2 failed warning detection – (On) relay enable (Off) relay disable
LED Indicators
Power Indicator	Green : Power LED x 2
Normal indicator	Green On : Operated in normal mode
Fault indicator	Amber : Indicates power failure occurred
Fault contact
Relay	Relay output for power failure warning
Power
Redundant Input Power	Dual 12~48 VDC power inputs at DC-Jack and 4-pin terminal block
Power Consumption (Typ.)	2.7 watts
Overload Current Protection	Present
Reverse Polarity Protection	Present on terminal block
Physical Characteristics
Enclosure	IP-30
Dimensions (W x D x H)	26.1(W) x 94.9(D) x 144.3(H) mm (1.03 x 3.74 x 5.68 inch.)
Weight (g)	405 g
Environmental
Storage Temperature	-40 to 85°C (-40 to 185°F)
Operating Temperature	-40 to 70°C (-40 to 158°F)
Operating Humidity	5% to 95% Non-condensing
Regulatory Approvals
EMI	FCC Part 15, CISPR (EN55022) class A,
EMS	EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Safety	EN60950-1
Warranty	5 years