NSM-205G-1SFP_DESCRIPTION.html
The NSM-205G-1SFP is 4 Port 10/100/1000 Base copper and 1 Gigabit fiber optic/copper combo port Ethernet Switch, Supports Auto Negotiation, Auto MDI/MDI-X, high-speed(1Gbps) and high-distance transmissions. Apart from this, NSM-205G-1SFP supports dual power and provides +12 VDC ~ +48 VDC power range to fit all the common power standards found in industrial automation, without external power converters.
NSM-205G-1SFP.html
| LED Indicators | | Status | PWR1, PWR2, Power fail, 10/100M, 1000M, Link/Act | | Ethernet | | Ports | 4 x RJ-45, 10/100/1000BaseT(X),
1 x RJ45/SFP Slot Combo, 100/1000Base-T(X)
| | Standards | IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX, IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow Control | | Processing Type | Store & forward, wire speed switching | | MAC Table | 8 K | | Memory Bandwidth | 10 Gbps | | Frame Buffer Memory | 1 Mbit | | Flow Control | IEEE802.3x flow control, back pressure flow control | | Jumbo Frames | 10 K for Speed 1000 M | | Isolation | 1500 Vrms 1 minute | | DIP Switch | 100 BaseSFP/1000 BaseSFP setting | | Fiber | | Ports | 1 x 100/1000 Mbps SFP Fiber Module slots | | Power | | Reverse Polarity Protection | Yes | | Input Range | +12 VDC ~ +48 VDC (Non-isolation) | | Redundant Power Inputs | Yes | | Consumption | 0.15A @ 24VDC | | Alarm Output | Yes, Relay 1 A @ 30 VDC | | Mechanical | | Casing | Metal | | Dimensions (mm) | DIN-rail mounting: 33 x 131 x 100 (W x L x H)
Wall mounting: 33 x 170 x 93 (W x L x H) | | Installation | DIN-rail mounting or wall mounting (optional) | | Ingress Protection Rating | IP30 | | Environment | | Operating Temperature | -40 C ~ +75 C | | Storage Temperature | -40 C ~ +85 C | | Humidity | 10% ~ 90% RH, non-condensing |
|
