LMP-0602-ST-M6 - Port Industrial PoE+ Light Layer 3 Managed Ethernet Switch, with 4*10/100Tx (30W/Port) and 2*100Fx Multi-Mode
by ANTAIRA

Antaira's LMP-0602-ST-M-V2 is a 6-port industrial PoE+ Light Layer 3 managed Ethernet switch that is embedded with 4*10/100Tx Ethernet ports that support IEEE802.3af/at for a maximum of 30 watts per port and 2*100Fx (ST connector) fiber ports with multi-mode (2Km)The LMP-0602-M-V2 is a fully manageable industrial Ethernet switch that supports the standard light layer 3 Ethernet configurable settings with a pre-loaded web console. This industrial switch is IP30 rated and DIN-rail mountable and provides operating temperature range model in STD: -10C to 70C. It also provides a high EFT and ESD protection for any industrial networking application in factory automation, ITS, power/utility, water/wastewater treatment plants, or any outdoor or harsh environmentThe Version 2 hardware is compatible with the latest light layer 3 firmware which permits static routes between VLANs.

Ambient Relative Humidity	5 to 95%, (non-condensing)
Certifications	FCC, CE, UL 61010-1, 61010-2-201
Configuration	Http, Https, Telnet, SSH, CLI, TFTP, SNMP v3
Dimensions	54 x 142 x 99 mm (W x H x D)
EMI	FCC Part 15 Subpart B Class A CE EN55032/EN61000-6-4 Class A
EMS	CE EN55035/EN61000-6-2 Class A IEC61000-4-2,3,4,5,6,8
Ethernet Port	4*10/100Base-TX with PoE+ (30W/Port), auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection
Fiber Port	2*100Base-FX ST type connector multimode
Flow Control	IEEE 802.3x flow control, back pressure flow control
Free Fall	IEC60068-2-32
Green	RoHS Compliant
Housing	Metal, IP30 protection
IGMP Group	1024
Input Voltage	48~55VDC Redundant Input
Jumbo Frame	9.6Kbytes
L2 Switching	Port/MAC/Protocol/IP Subnet-based VLAN, VLAN trunking, GARP/GVRP, Loop Guard, Link Aggregation static/LACP, BPDU guard, Error disable recovery, IGMPv2 snooping, MLD snooping, IGMP filtering, IPMC throttling / filtering leave proxy, DHCP snoo(more...)
L3 Switching	DHCP option82, static routes
LED Indicators	System: Power 1, Power 2, Master, Ring, Fault Ethernet Ports: Speed/Link/Active Fixed Fiber: Link/Active
MAC Table Size	8K
Memory Buffer	4Mbits
Mounting	DIN-Rail mounting, Wall mounting
Network Cable	10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5 cable EIA/TIA-568 100-ohm (100m)
Network Redundancy	STP/RSTP/MSTP, port trunk with LACP, ERPS v1/v2 (<50ms)
Operating Temperature	-10C to 70C
Overload Current Protection	Present
Poe Pin Assignment	V+, V+, V-, V-, for pin 1, 2, 3, 6 (Endspan, Mode A)
PoE Power Budget	120W@48~55VDC
Power Connection	1 removable 6-contact terminal block
Power Saving	ActiPHY, PerfectReach, IEEE 802.3az EEE power management
Priority Queues	8
Processing Type	Store and Forward
Protocols	IPv4/IPv6, SNMP v1/v2c/v3, LLDP, LLDP-MED, HTTP, HTTPS, SSHv2 telnet, DHCP client, DHCPv6 client, DHCP server, Port Mirror, DNS client/proxy, IP based Access Filter, ICMPv6, syslog, Time Zone / Daylight Saving, NTP client, RMON, sFlow, Loop (more...)
QoS	802.1p Queueing, Input priority mapping, Storm control for Unicast/Multicast/Broadcast, Port/Queue/ACL policer, Port egress shaper, Queue egress shaper, DiffServ (DSCP), Tag remarking, Scheduler mode
Relay Contact	24 VDC, 1A resistive
Reverse Polarity Protection	Present
RS232 Serial Console	1*RS232 in RJ45
Shock	IEC60068-2-27
Storage Temperature	-40C ~ 85C
Switching Architecture	Back-Plane (Switching Fabric): 1.2Gbps
System / Diagnostics	Dual Image Protection, PING, PING6
System Power Consumption	7.5W
Transfer Rate	14,880pps for Ethernet Port 148,800pps for Fast Ethernet Port
Vibration	IEC60068-2-6
VLAN Groups	4095
Weight	Unit: 1.9 lbs Shipping: 2.7 lbs

LMP-0602-ST-M-V2.pdf

346 K