1000BaseT(X) ports, 1 1000BaseX (SFP slot) port, 0 to
by MOXA

Full Gigabit Ethernet ports
IEEE 802.3af/at, PoE+ standards
Up to 30 watts output per PoE port
24/48 VDC flexible redundant power inputs
Supports 9.6 KB jumbo frames
Intelligent power consumption detection and classification
Smart PoE over current and short circuit protection
-40 to 75°C operating temperature range (T models)

Description
Specification
Datasheet

The EDS-G205A-4PoE-1GSFP switches are smart, 5-port, unmanaged full Gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network.

• Technology
Standards	IEEE 802.3af/at for Power-over-Ethernet IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3ab for 1000BaseT IEEE 802.3z for 1000BaseX IEEE 802.3x for Flow Control
Processing Type	Store and Forward
• Switch Properties
MAC Table Size	8 K
Packet Buffer Size	136 KB
Jumbo Frame Size	9.6 KB
• Interface
Fiber Port	1000BaseSFP slot
RJ45 Ports	10/100/1000BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection
PoE Pinout	V+, V+, V-, V- for Pin 1,2,3,6 (Endspan, MDI Alternative A)
LED Indicators	P1, P2, 10/100/1000M, PoE
• Power Requirements
Input Voltage	24/48 VDC, redundant dual inputs
Input Current	Max 7.5 A @ 24 VDC (supports up to 4 ports at 30 watts per PoE port)
Overload Current Protection	Present
Connection	2 removable 2-contact terminal blocks
Reverse Polarity Protection	Present
• Physical Characteristics
Housing	Metal, IP30 protection
Dimensions	29 x 135 x 105 mm (1.14 x 5.31 x 4.13 in)
Weight	300 g
Installation	DIN-rail mounting, wall mounting (with optional kit)
• Environmental Limits
Operating Temperature	Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
• Standards and Certifications
Safety	UL 508
EMI	FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS	EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 4, EN 61000-4-5 (Surge) Level 4, EN 61000-4-6 (CS) Level 3, EN 61000-4-8
Rail Traffic	EN 50121-4
Shock	IEC 60068-2-27
Freefall	IEC 60068-2-32
Vibration	IEC 60068-2-6
Note	Please check Moxa’s website for the most up-to-date certification status.