|
|
|
NS-205FCS - 1 Port Fiber Optic, 4 Port 10/100M RJ 45 Connector, Single Mode, SC connector, Plastic Case
by ICP DAS
|
|
|
|
*For Single Mode Use* Unmanaged 4 Port Industrial 10/100BaseT Ethernet to Fiber Optics 100BaseFX Converter that secures data transmission by using fiber optic transmission to provide immunity from EMI/RFI interference. (SC Connector; Single-mode). Comparable to Sixnet, Stride, Hirschmann, and other industrial Ethernet Switches. Supports operating temperatures from 0°C ~ +70°C (32F ~ 158F).
|
|
|
 The NS-205F/NSM-205F is a 4-port unmanaged Ethernet with 1 fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 15 km) transmissions.
The NS-205F/NSM-205F provides a wide 10 to 30 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.
Features
- Provides 1 x 100-FX fi ber port plus 4 x Ethernet ports
- Each port supports both 10/100 Mbps speed auto negotiation
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- Automatic MDI/MDI-X crossover for plug-and-play
- Store-and-forward architecture
- Supports operating temperatures from 0 ~ +70 °C
| Technology |
| Standards |
IEEE 802.3, 802.3u, 802.3x |
| Processing Type |
Store & forward; wire speed switching |
| MAC Addresses |
1024 |
| Memory Bandwidth |
3.2 Gbps |
| Frame Buffer Memory |
512 Kbit |
| Flow Control |
IEEE 802.3x flow control, back pressure flow control |
| Ethernet Interface |
| RJ-45 Ports |
10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
| LED Indicators |
Power, Link/Act, 10/100M |
| Ethernet Isolation |
1500 Vrms 1 minute |
| Fiber Interface (100 Base-FX; SC/ST type) |
| Single-Mode |
NS-205FCS/NSM-205FCS |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance: 15 km, (9/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -15 dBm
Max. TX Output: -8 dBm
Max. RX Sensitivity: -36 dBm |
| Power Input |
| Input Voltage Range |
+10 ~ +30 VDC (Redundant input) |
| Power Consumption |
0.14 A @ 24 VDC |
| Protection |
Power reverse polarity protection |
| +/-4 kV ESD Protection |
Yes |
| Connector |
5-Pin Removable Terminal Block |
| Mechanical |
| Casing |
Plastic (Flammability UL 94V-0) |
| Dimensions (W x L x H) |
64 mm x 98 mm x 110 mm |
| Installation |
DIN-Rail Mounting |
| Environment |
| Operating Temperature |
0 °C ~ +70 °C |
| Storage Temperature |
-20 °C ~ +85 °C |
| Ambient Relative Humidity |
10% ~ 90% RH, non-condensing |
|
|
